my home made 3inch exhaust
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
my home made 3inch exhaust
well i really got tired of running open downpipe, and smelling like raw ass gas when i got out of the car. plus it was mad loud, and i was always getting hassled by the local law.
so i grabbed some 3 inch mandrel bends from a buddy, got a stick of 3 inch from an exhaust shop, my chop saw and mig welder and went at it. not bad for my first complete exhaust, so i think.
i used a "Bullet" muffler from summit, the welds looked like ass, but for 27 bux i cant complain, i also used a 3 inch V band from full race to go from the downpipe to the exhaust, much easier to take off.
and i had to put a gangster dump on the back
all in all i like it, i did have to put a couple tiny bends in it with a bender but nothing that would inhibit flow, it is much nicer to have the noise back at the rear of the car, instead of under my feet!
it is kinda loud still but i hadnt found a 3 inch resonator yet locally so i will probably have to order one from the internerD
THIS IS KINDA WHAT I WAS TRYING TO COPY!
so i grabbed some 3 inch mandrel bends from a buddy, got a stick of 3 inch from an exhaust shop, my chop saw and mig welder and went at it. not bad for my first complete exhaust, so i think.
i used a "Bullet" muffler from summit, the welds looked like ass, but for 27 bux i cant complain, i also used a 3 inch V band from full race to go from the downpipe to the exhaust, much easier to take off.
and i had to put a gangster dump on the back
all in all i like it, i did have to put a couple tiny bends in it with a bender but nothing that would inhibit flow, it is much nicer to have the noise back at the rear of the car, instead of under my feet!
it is kinda loud still but i hadnt found a 3 inch resonator yet locally so i will probably have to order one from the internerD
THIS IS KINDA WHAT I WAS TRYING TO COPY!
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Last edited by NChatch; 01-14-2006 at 07:27 AM.
Back in the Game
Join Date: May 2005
Posts: 2,207
Likes: 0
Received 0 Likes
on
0 Posts
Looks good for home made man. Nice work. 
-Justin
-Justin
__________________
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
HONDAMIKE.COM
Join Date: Jan 2004
Posts: 3,942
Likes: 0
Received 0 Likes
on
0 Posts
Looks good 
I like the open DP 
.Sounds like a jet 
& what smell ? 
.What's up w/ the dump tube ?
__________________
"THE REAL HONDAMIKE" ASE Master Technician
"Imitation is the highest form of flattery", but clones can get it wrong because we are promoting individuality and being proud of yourself.
"THE REAL HONDAMIKE" ASE Master Technician
"Imitation is the highest form of flattery", but clones can get it wrong because we are promoting individuality and being proud of yourself.
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys, school bus my ass!
oh shitmike my bad, i talked to phil and he said with out it in front of him he doesnt feel somfortable doing it, plus it would cost a bit, if you want since i am gonna do another one for myself, i can order an extra J bend a make a dump for you out of an actual "bend" instead of having to radius cut it like it was before
oh shitmike my bad, i talked to phil and he said with out it in front of him he doesnt feel somfortable doing it, plus it would cost a bit, if you want since i am gonna do another one for myself, i can order an extra J bend a make a dump for you out of an actual "bend" instead of having to radius cut it like it was before
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
HONDAMIKE.COM
Join Date: Jan 2004
Posts: 3,942
Likes: 0
Received 0 Likes
on
0 Posts
sounds good to me.thanks Mike
__________________
"THE REAL HONDAMIKE" ASE Master Technician
"Imitation is the highest form of flattery", but clones can get it wrong because we are promoting individuality and being proud of yourself.
"THE REAL HONDAMIKE" ASE Master Technician
"Imitation is the highest form of flattery", but clones can get it wrong because we are promoting individuality and being proud of yourself.
Rockin' 4 more Cylinders
Join Date: Apr 2004
Posts: 11,897
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NChatch
thanks guys, school bus my ass!
jfwy
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
i stepped on my weiner!
Thread Starter
Join Date: Oct 2002
Posts: 2,994
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cold_Beer
jfwy
Originally Posted by hondamike504
sounds good to me.thanks Mike
I WAS SHOOTING FOR a ghetto copy of something similar to a SPOON N1 kinda look-alike, but on a redneck alabama/plant city level
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
