vafc/ need help with instalation
Thread Starter
im a ricer!!
Joined: Dec 2004
Posts: 1,746
Likes: 0
vafc/ need help with instalation
i have an 88 crx si, with a pm6 ecu. i need a diagram so i can hook up the vafc to the ecu, and syliniod. thank you so much. oh, its a complete z6 in the crx.
__________________
Janky
Joined: Feb 2003
Posts: 4,160
Likes: 0
Registered User
Joined: Jan 2005
Posts: 266
Likes: 0
Here you go... Its Kinda Crappy, But If you Email me I can send you the File that is in a spredsheet.
How to Instal A'pexi VAFC in a CRX
V-AFC VTEC controller ECU PIN location
Red & Orange wire splice/connect to A15 (yellow/black)
Green wire RPM signal splice/connect to B15 (white1)
Pink wire VTEC signal output to VTEC solenoid (green/yellow)
Purple wire VTEC signal input not used on PM6 ecu
Blue wire VTM signal not used on PM6 ecu
Gray wire Throttle signal splice/connect to C7 (red/blue wire)
Yellow wire Pressure signal output cut/connect C11 ECU side harness
Si/Hf = white1 , DX = orange
White wire Pressure signal input cut/connect C11 ENGINE side harness
Si/Hf = white1 , DX = orange
Black wire Ground splice/connect to A16 (brown/black wire)Engine side harness
Brown wire Ground splice/connect to A16 (brown/black wire)has to be connected closer to the ECU
How to Instal A'pexi VAFC in a CRX
V-AFC VTEC controller ECU PIN location
Red & Orange wire splice/connect to A15 (yellow/black)
Green wire RPM signal splice/connect to B15 (white1)
Pink wire VTEC signal output to VTEC solenoid (green/yellow)
Purple wire VTEC signal input not used on PM6 ecu
Blue wire VTM signal not used on PM6 ecu
Gray wire Throttle signal splice/connect to C7 (red/blue wire)
Yellow wire Pressure signal output cut/connect C11 ECU side harness
Si/Hf = white1 , DX = orange
White wire Pressure signal input cut/connect C11 ENGINE side harness
Si/Hf = white1 , DX = orange
Black wire Ground splice/connect to A16 (brown/black wire)Engine side harness
Brown wire Ground splice/connect to A16 (brown/black wire)has to be connected closer to the ECU
__________________
_____________
91 Hatch B16-T
13.0 @ 110 - 7psi
--Even my Truck has Vtec--
_____________
91 Hatch B16-T
13.0 @ 110 - 7psi
--Even my Truck has Vtec--
Last edited by Duke_nukem; Dec 15, 2005 at 06:27 AM.
Janky
Joined: Feb 2003
Posts: 4,160
Likes: 0
those instructions have obd0 in them the Ha-1 diagram is a obd0 pin out.
