dsm injectors?
GSR hatch in motion
Thread Starter
Join Date: Aug 2005
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
dsm injectors?
i have some dsm blue top injectors and i dont know if i need a resistor block/box for them. i have a b18b in my eg and i used the the stock vx harness which has a dummy plug for one. do i need one?
__________________
Japan's Finest
Japan's Finest
i have the 450cc injectors in my crx and i am using the stock resistor box. i also have a zdyne ecu.
word of advice, best bet is to send them off to RC Engineering to have them cleaned and balanced.
2 of my injectors showed only dripping. that could have been a very bad day for me.
word of advice, best bet is to send them off to RC Engineering to have them cleaned and balanced.
2 of my injectors showed only dripping. that could have been a very bad day for me.
__________________
by http://www.flickr.com/people/8341770@N07/, on Flickr
if you can only race me in a straight line then whats the point ...91 SMF SCCA
TR "Old Skool EF" Member #017 chi town brat TR "eg6" crew #6
I see people out there spending money on the car to improve it … If you spend half that effort just working on your driving skills, making you and the car work together as a team, then you’ll go faster – period. To make the car go a second faster on the track takes a lot more energy and money than making yourself drive it one second faster.
– the late Tom Thrash SCCA Solo E Production
GSR hatch in motion
Thread Starter
Join Date: Aug 2005
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
injectors
my car doesnt have a resistor box. what car should i get one from and will the dummy plug on the driver side fender work?
__________________
Japan's Finest
Japan's Finest
Originally Posted by chi town brat
i have the 450cc injectors in my crx and i am using the stock resistor box. i also have a zdyne ecu.
word of advice, best bet is to send them off to RC Engineering to have them cleaned and balanced.
2 of my injectors showed only dripping. that could have been a very bad day for me.
word of advice, best bet is to send them off to RC Engineering to have them cleaned and balanced.
2 of my injectors showed only dripping. that could have been a very bad day for me.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
You can go to a junk yard and grab a resistor box out of just about any obd0 car with multi point fuel injection... CRXs, accords, etc. etc.... I actually have one layin around if you are interested
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Originally Posted by chi town brat
i have the 450cc injectors in my crx and i am using the stock resistor box. i also have a zdyne ecu.
word of advice, best bet is to send them off to RC Engineering to have them cleaned and balanced.
2 of my injectors showed only dripping. that could have been a very bad day for me.
word of advice, best bet is to send them off to RC Engineering to have them cleaned and balanced.
2 of my injectors showed only dripping. that could have been a very bad day for me.