questions about eg dashes
Spent more money than you
Joined: Oct 2003
Posts: 7,708
Likes: 0
but i'm sure anything can be made to fit with enough time/patience/money
why?
__________________
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fucking temperamental.
Registered User
Joined: Mar 2005
Posts: 3,636
Likes: 0
Originally Posted by The Spectacle
but i'm sure anything can be made to fit with enough time/patience/money
why?
@ ?Thats obvious
Cause he wants to?
You will have to prolly get the EK AC Ducting system, cut the top front bar brace, do some cutting/fabbing to the door pannels, and some other things i cant think of off the top of my head.
__________________
www.CEMayhall.com
Joined: Aug 2005
Posts: 1,070
Likes: 0
I called you earlier tonight about my set-up... well.........Damn bro... I guess I was wrong??? 
I suck!!! After reading up on it, Its really simular to the integra/GSR dash swap that everyone does!!! There are a couple of different things that you need to do though...
You need to make special brakets for the side dashboard mounts! You alse need to change out the entire air box vents, and also change out the underdash wire harness... You will need to cut the door pannels just as you need to do in the integra dash swap...
under the dash view for the EK
under the dash view for the EG... Notice the air box difference???
these are the side mounts
these are the special brackets that you would have to make
these are the brackets mounted
You will aslo have to modify the bracket by the steering wheel so the dash sits correctly
Finnished PRODUCT!!!
??? Bro!!! I hope this helps you out a little??? Good Luck if you decide you want to do it!!! Post pictures when youre done!!! Cya!
I suck!!! After reading up on it, Its really simular to the integra/GSR dash swap that everyone does!!! There are a couple of different things that you need to do though... You need to make special brakets for the side dashboard mounts! You alse need to change out the entire air box vents, and also change out the underdash wire harness... You will need to cut the door pannels just as you need to do in the integra dash swap...
under the dash view for the EK
under the dash view for the EG... Notice the air box difference???
these are the side mounts
these are the special brackets that you would have to make
these are the brackets mounted
You will aslo have to modify the bracket by the steering wheel so the dash sits correctly
Finnished PRODUCT!!!
??? Bro!!! I hope this helps you out a little??? Good Luck if you decide you want to do it!!! Post pictures when youre done!!! Cya!
__________________
Last edited by CEMAYHALL; Oct 24, 2005 at 02:36 PM.
www.CEMayhall.com
Joined: Aug 2005
Posts: 1,070
Likes: 0
ok but only b/c I am being nice!!! I hope this helps you out a little... http://www.honda-tech.com/zerothread?id=1380608 cya
__________________
