Fast Honda/Acura ROLL-CALL
i Have had very little seat time, I wish I could get some practice time in, But after being kicked, I tried to go back, filled out my tech card, about 10min later I was called over to the pumps to meet a tech, he looked at my car and said so sorry no racing tonight
I was like Nooo, didnt even get my $10 back, how lame..
On another note, fast NA cars are nasty off the line, I remember about 6 years ago, in tampa, when Neal had the red hatch, My friend had a 2G eclpise with a few goodies, we thought the car was fast. A friend was like "race that little red car, you will win" we we were like sure, they lined up, a few people were like, whats done to the eclipse?? we told them and they laughed, my buddy ended quiting after 2nd gear. it was funny as shit. we got played so hard. Great times..
On another note, fast NA cars are nasty off the line, I remember about 6 years ago, in tampa, when Neal had the red hatch, My friend had a 2G eclpise with a few goodies, we thought the car was fast. A friend was like "race that little red car, you will win" we we were like sure, they lined up, a few people were like, whats done to the eclipse?? we told them and they laughed, my buddy ended quiting after 2nd gear. it was funny as shit. we got played so hard. Great times..
__________________
Modified Racing
Street Tuning & Dyno Tuning the greater east coast area for over 10 years and running!
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
Originally Posted by slo_89_crx_si
well, i will go as well as long as my car is done in time for the track event, lets see 

Originally Posted by Punkinterviews
Mike is a straight up guy! 
I do have a set of slicks for sale though, not either set of the Lenso's.
I have a nice set of slicks Matt Slocxhatch usually uses. These are the slicks he made his 12.1 @ 114 passes on.
If anyone is interested in them please PM me.
As for me being a "Fast Honda" I'm out of the runnings for now
But hopefully I'll be back soon enough. We'll see. Hopefully Jackson will send me a new charger since their parts failed and have caused $3k in damage. O'well, I hope to see some fast Honda's out there. CMS is taking the focus off of the Integra this time around and putting it on Matt's car.......mid - low 11's hopefully!
I do have a set of slicks for sale though, not either set of the Lenso's.
I have a nice set of slicks Matt Slocxhatch usually uses. These are the slicks he made his 12.1 @ 114 passes on. If anyone is interested in them please PM me.
As for me being a "Fast Honda" I'm out of the runnings for now
did i miss something?? WTF happened to the blower, shoot me a PM!
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
I'll be there! But I'm not running...15's are not impressive.
__________________


Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD



Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fucking temperamental.
Originally Posted by na200whp
that is some funny stuff..... not goofing on ya . just thought it was funny.
__________________
I <3 RooR!!!!!!

TR "Old Skool EF" Member #121(aka#420)
I <3 RooR!!!!!!

TR "Old Skool EF" Member #121(aka#420)
Originally Posted by Teamcalloway03
I pray your car is done...That way you can line up with the L-town slowness..Untill then good luck
believe me your not the only one praying, but when its done everyone will know....trust me on that...
__________________
- Officially Retired....for now...
- Officially Retired....for now...

jason y not man!!!!! i will be there but am by no means fast, currently 12.114@ 114 on 12.9 psi, bbut we will see what she does at 16-18 psi on alchy injection. im not saying it will run 11s but i sure hope it does!!!! ill see you guys there!!!!! and mike and jason, we should meet up some time, since im much closer to yall now (tallahasse) see you guys around.
__________________
You can find me at the Track!
KJ built
ALPHA TUNED
Induction Performance 727.505.1423
* Engine Management Tuning, Track Setup, Consultation, Turbo Sales, Parts Sales (WorldWide)
^^^
ONLY SHOP IN TAMPA THAT TREATS YOUR CAR AS THEIR OWN
You can find me at the Track!
KJ built
ALPHA TUNED
Induction Performance 727.505.1423
* Engine Management Tuning, Track Setup, Consultation, Turbo Sales, Parts Sales (WorldWide)
^^^
ONLY SHOP IN TAMPA THAT TREATS YOUR CAR AS THEIR OWN
This sux, I cant pay with my PayPal, Im waiting for a call fro them to receive a lost password, someone tried to hax into my account and messed it all up, I hope its fixed B4 the deadline, or B4 it get too full..
anyone wanna loan me some racing money
I will buy you a hotdog and some nacho's and a budlight
)
)
__________________
Modified Racing
Street Tuning & Dyno Tuning the greater east coast area for over 10 years and running!
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988


