ls crank pully
Registered User
Thread Starter
Join Date: Jun 2005
Posts: 1,673
Likes: 0
Received 0 Likes
on
0 Posts
ls crank pully
im trying to get this bolt loose for the crank pully... and its not coming off.. i've tryed my air impact wrench.. ive tryed a torque wrench.... come some one tell me a trick on how to get this shit off???? please hellppp
You have something (Moroso crank pulley holder) holding the crank pulley in place? I have done it multiple times with a breaker bar.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Originally Posted by yrethguad
I'm racking my brain to remember if it was reverse threaded or not.... You tried both ways anyway?
As alpha said, you need a moroso crank pulley holder tool & a long breaker bar.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
engine building &best
Join Date: May 2003
Posts: 11,971
Likes: 0
Received 0 Likes
on
0 Posts
never seen one not come off with at least 130Psi you must have a crappy impactGun
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
I remember when I took mine off a couple years ago, I tried everything, then my dad used a torch to heat up the nutt, not too long though and it came off with the airgun. you could try that.
Registered User
Thread Starter
Join Date: Jun 2005
Posts: 1,673
Likes: 0
Received 0 Likes
on
0 Posts
nah my air guns good its rated like 550 or somthing i just need that damn pulley holder.. some one sell me a pulley holder i dont want to go spend a lot to buy a new one