I was working on a turbo h22 crx a while ago, but I sold the unfinished project because I didn't have the time or the ability to do this on my own. This guy who owed me money gave me an h22a1 today, and I want to put it in a crx. I have lots of free time now, but I still need help welding the custom mounts and brackets. I'm looking for someone that wants to help me with this swap. I also have a brand new Turbo kit for a b series that I'll use on the H22, with an H-series manifold of course.
Also give me some opinions on this setup.

 

the only person i know of to do that is coleon on TR, id ask him from what he said theres going to be alot of custom fabrication.. Good luck on the swap

 

there ain't much room in that engine bay...good luck

 

My CRX had a H23 in it.

 

Hay Bro, If you want email me and i can give you probally the most acurate way to approach this, And take into matter, If I had to do it again, there were alot of things I wish i would have know from the get go, but Fuck It. I can send you some pics, etc of the process and cuts on the frame, position / Pitch of mtr. Axle wise, etc etc.
Good Luck. Cole

 

pm'd

 

Darren down in SRQ has done it (he is the guy who made the AWD Integra seen in most of the import mags and the one pictured in the Honda Tuning how-to). He's a pretty cool guy with a lot of knoweldge. He isn't cheap but his quality is hands down. Give him a call 941-809-9281. I believe he still has his h22 crx which he can show you. Let us know how it goes.

-Mike

 

i put an h22a1 in my old crx almost a year ago. I know how to do it, but I can't do it because I don't know how to weld. I had a guy do the welding last time. I will give Darren a call though, to discuss this swap, go see it, and see how much he will charge for that. thanks for the info.

 

Is that a VTEC engine? how did it perform?

 

I can handle your welding needs and also the turbo fab stuff if you want.