i am swapping a 95 d16z6 motor into my 94 civic hatch dx. i know that d-series parts are interchangable so i wanted to know something. could i use the parts off my d15b7 that i am missing on my d16z6. i.e. altenator, starter, water pump, mounts, fuel rail, clutch, axels, cv's? please let me know what i wont be able to use off my d15 for my d16. thanx

 

ttt

 

Axles and clutch are the same, alternator, starter, water pump are different. The mounts should be the same, but I'm not 100% certain.

 

so i would need the d16z6 water pump, altenator, starter, but what about the clutch off my d15b7? can i use that?

 

The clutch is the same, but for the other parts, you will need them from the d16z6

 

ttt

 

starters are the same so is the alternator. waterpump is diffrent mounts are the same , axles = carry over , hell you can use your stock b7 transmission (if you aren't concerned about shitty gearing). And you can reuse your b7 stuff as well ... ac compressor , alternator ... will all just bolt right on. The distributor is not interchangeable , however many internal parts are. Do you have a p28 ecu you are going to use.

 

+uno!

 

thanx. so i can use the b7 clutch on the z6 tranny?