b18c1 owners i need help!!!
have u guys experienced hard shifting ruff shifting or grinding gears? please let me know whats up? i read a thread i forgot where but it say that on the b18c1 original clutch the disk messes up and causes ruff shifting,please post here the problems and results..i dont wanna start buying stuff for no reasons...thanks
first step and cheapest is always to check and/or flush tranny fluid...
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
i was having a hard time shifting and it was shifting rough right before my clutch went out. i tried adjusting the pedal and i checked the fluid and it looked brand new so i figured i needed a new clutch. when i looked at the disc, one of the springs was all fucked up so yeah, that was it. put then new clutch kit in and everything was fine.
good luck!
good luck!
__________________
meows meows
TRick Squad Member #3
VicPrez of IttyBittyTittyCommittee

meows meows
TRick Squad Member #3

VicPrez of IttyBittyTittyCommittee


something after you check the fluid would be the shifter "balls" there are two ball bearing type balls that the shift rod rides on, going into the tranny, they are pressured by a spring, sometimes the springs wear out causing the shift rod to have a little play, up and down and shifts get sloppy and dont want to go.
also my shift rod was bent, not that i shift my car hard or anything( i would NEVER do that:sarcasm)
or last but not leats synchros, go to gearspeed on the internet and order them, they are pretty cheap
also my shift rod was bent, not that i shift my car hard or anything( i would NEVER do that:sarcasm)
or last but not leats synchros, go to gearspeed on the internet and order them, they are pretty cheap
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
[QUOTE=NChatch]something after you check the fluid would be the shifter "balls" there are two ball bearing type balls that the shift rod rides on, going into the tranny, they are pressured by a spring, sometimes the springs wear out causing the shift rod to have a little play, up and down and shifts get sloppy and dont want to go.
they are called detent balls ,and they should not cause a hard shift, or grind if the spring was worn ,thay rearly would go bad
they are called detent balls ,and they should not cause a hard shift, or grind if the spring was worn ,thay rearly would go bad
__________________
I bent my shift linkage too
Rough shifts owned that bitch
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
[QUOTE=crazyhatch]
well mine went bad in my JDm gsR, and they seemed to be causing an issue with shifting, so i replaced them and all the above named parts, well jason did, and my tranny shifts perfect
Originally Posted by NChatch
something after you check the fluid would be the shifter "balls" there are two ball bearing type balls that the shift rod rides on, going into the tranny, they are pressured by a spring, sometimes the springs wear out causing the shift rod to have a little play, up and down and shifts get sloppy and dont want to go.
they are called detent balls ,and they should not cause a hard shift, or grind if the spring was worn ,thay rearly would go bad
they are called detent balls ,and they should not cause a hard shift, or grind if the spring was worn ,thay rearly would go bad
well mine went bad in my JDm gsR, and they seemed to be causing an issue with shifting, so i replaced them and all the above named parts, well jason did, and my tranny shifts perfect
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net


