Honda/Acura Tech Honda tech discussion.

shift linkage

Thread Tools
 
Old May 26, 2005 | 08:22 AM
  #1 (permalink)  
poorboyz's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 32
Likes: 0
Default shift linkage

Is the shift linkage from a 90-93 integra the same as the 94-01? The reason I'm asking is because I did a B18b swap into my civic hatch and need a linkage and I came accross a couple but they are for 90-93 integras and I didn't know if that would work or not? I need to know this asap if anyone has any info on this.

Thanks
Chuck
Reply
Old May 26, 2005 | 08:24 AM
  #2 (permalink)  
CubanYoshi's Avatar
You can't handle it
 
Joined: May 2005
Posts: 1,399
Likes: 0
Default

im not sure about the 90-93 teg shift linkage but im pretty sure you can use a 99-00 Si shift linkage if you could find one of those, or call Acura dealer, they have them for like 150 bucks
Reply
Old May 26, 2005 | 09:32 AM
  #3 (permalink)  
poorboyz's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 32
Likes: 0
Default

Thank you Yoshi. Anyone else because I have found one from a 90-93 intown but I need to know that it is the same as the 94-01 because I know linkages from 94-01 will fit.

Thanks
Chuck
Reply
Old May 27, 2005 | 07:08 PM
  #4 (permalink)  
solocam hatch's Avatar
OPEN LEGS, CLOSE MOUTH
 
Joined: Nov 2004
Posts: 460
Likes: 0
Default

i have a 92 hatch w B18
i used the 93 teg linkage
works well with short shifter
good luck
Reply
Old May 28, 2005 | 06:30 AM
  #5 (permalink)  
kender's Avatar
gadget man
 
Joined: Aug 2002
Posts: 2,638
Likes: 0
Default

I thought the b-series swaps were a direct bolt in on the hatches. Is the stock linkage too short or too long. I have a b16 going into a 93 hatch.
__________________
U.S.S.A Crew Member #001



Reply




All times are GMT -8. The time now is 10:50 AM.