Tampa Racing

Honda/Acura Tech Honda tech discussion.

what do i need for a sohc zc to a dohc zc swap

 
Old May 22, 2005 | 07:55 PM
Share
  #1 (permalink)  
stephen's Avatar
stephen
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 41
Likes: 0
Default what do i need for a sohc zc to a dohc zc swap
i'am poor and wont a dohc zc in my 88 crx si what do i need
Reply
0
Old May 23, 2005 | 09:32 AM
Share
  #2 (permalink)  
95gainfla's Avatar
95gainfla
smokes weed...everyday.
 
Joined: Jan 2005
Posts: 5,616
Likes: 0
Default
buy a dohc zc engine...
Reply
0
Old May 23, 2005 | 01:59 PM
Share
  #3 (permalink)  
stephen's Avatar
stephen
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 41
Likes: 0
Default
yeah i know that what about mounts and stuff and i found a b18 at a junck yard today what would i need
Reply
0
Old May 23, 2005 | 04:14 PM
Share
  #4 (permalink)  
defekt's Avatar
defekt
******
 
Joined: Mar 2002
Posts: 6,051
Likes: 0
Default
a b18 is a integra ls motor. a dohc zc is a 86-89 integra motor. you dont need any mounts or anything for the older teg motor. d16a1 is a direct swap-in. you can even use your tranny...
__________________
RIP my Brother Jason 5/26/1980 - 9/09/2011
Reply
0
Old May 23, 2005 | 05:35 PM
Share
  #5 (permalink)  
stephen's Avatar
stephen
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 41
Likes: 0
Default
b18 is a integra ls motor will it go in with out any mounts swaps and is it batter then the zc
Reply
0
Old May 23, 2005 | 05:38 PM
Share
  #6 (permalink)  
Cronic
Guest
 
Posts: n/a
Default
Originally Posted by stephen
b18 is a integra ls motor will it go in with out any mounts swaps and is it batter then the zc
Incorrect. B series swap will require axles, upper and lower driver's side mount, rear tranny bracket, B16 shift linkage, ECU, etc..
Reply
0
Old May 23, 2005 | 05:40 PM
Share
  #7 (permalink)  
stephen's Avatar
stephen
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 41
Likes: 0
Default
is it hard to do all the mounts and linkage
Reply
0
Old May 23, 2005 | 05:43 PM
Share
  #8 (permalink)  
Cronic
Guest
 
Posts: n/a
Default
No.
Reply
0
Old May 23, 2005 | 05:46 PM
Share
  #9 (permalink)  
stephen's Avatar
stephen
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 41
Likes: 0
Default
how much money to do it all any cuting or welding
Reply
0
Old May 23, 2005 | 05:47 PM
Share
  #10 (permalink)  
Cronic
Guest
 
Posts: n/a
Default
It's all bolt on. - A mount kit will run you about 400-500 dollars. Will come with everything you need to swap it in. - You can get them from the dealer for about 100/each.
Reply
0

Thread Tools

Advanced Search

All times are GMT -8. The time now is 01:46 PM.