View Poll Results: Does a demand for a Hondata tuner exist in the tampa area?
Yes, I would like you (mtber) to tune Hondata systems because I run Hondata or I plan on running it.



41.67%
No, I do not believe a hondata tuner is needed in this area due to the lack of Hondata users.



8.33%
No, I would rather run Crome Professional because it is more cost effective & works just as well.



50.00%
Voters: 12. You may not vote on this poll
POLL: Does a demand for a Hondata tuner exist in the tampa area?
Originally Posted by 60-1EK
John, I was a little troubled to answer your PM, but I can I will answer it here. There is someone that will be taking my place. He already has all the stuff to do the Hondata and is working with Hondata in becoming a full dealer for there products too. I know there is a demand for it as I have tuned atleast 15 Hondata setups in the past couple months, but it is up to you if you want to spend cash even though someone else is going to be tuning Hondata locally.
Originally Posted by juiced2ndgenteg
I would like to gauge your experience, how many boosted honda's have you tunned? havn't you only been tunning for 1 year?
just wondering.
just wondering.In my opinion its the knowledge of the tuner not the amount of time or amount of cars that counts.
I have seen of several tuners in other areas who have been tuning 2+ years and still don't have a clue as to what they are doing in some areas of tuning etc.
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Originally Posted by 60-1EK
John, I was a little troubled to answer your PM, but I can I will answer it here. There is someone that will be taking my place. He already has all the stuff to do the Hondata and is working with Hondata in becoming a full dealer for there products too. I know there is a demand for it as I have tuned atleast 15 Hondata setups in the past couple months, but it is up to you if you want to spend cash even though someone else is going to be tuning Hondata locally.
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Originally Posted by Beans&Disease
I want my car retuned on Crome!!!!
Uberdata, sucks uber-dick! shit idle!
Uberdata, sucks uber-dick! shit idle!
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Originally Posted by NXSpoon
Good luck to ya John, whichever avenue you go down. I know that I'll be using Crome Pro when my "project" is done, and I will be calling you up.
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Originally Posted by juiced2ndgenteg
I was just wondering, I know you can tune very well! bump for john.
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
John, just curious, but have you ever used Hondata, Zdyne, turbo edit or AEM? I see you offer that in your sig, but not sure if you even have used them.
Originally Posted by 60-1EK
John, just curious, but have you ever used Hondata, Zdyne, turbo edit or AEM? I see you offer that in your sig, but not sure if you even have used them.
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Originally Posted by NChatch
i think thereis a demand for it, not soley just for new customers buying systems but for the guys who already have it and are needing to make changes/upgrades/retunes.
it is only a matter of time before a hondata customer will want to upgrade something and need a re tune.
so i say go for it, even if you dont sell them like hotcakes or anything the service is still needed and appreciated.
it is only a matter of time before a hondata customer will want to upgrade something and need a re tune.
so i say go for it, even if you dont sell them like hotcakes or anything the service is still needed and appreciated.
__________________
Great accomplishment only comes with great risk. I’ll accept the crippling, gut wrenching disappointment of risking all, and failing, but only by putting my whole heart and soul, my whole being into something, will I have the chance to walk among the stars.
Those who risk nothing, those who live their lives in fear, will never have that chance.
Failure is not a sin. It’s being too afraid to even try, that is a sin.
Great accomplishment only comes with great risk. I’ll accept the crippling, gut wrenching disappointment of risking all, and failing, but only by putting my whole heart and soul, my whole being into something, will I have the chance to walk among the stars.
Those who risk nothing, those who live their lives in fear, will never have that chance.
Failure is not a sin. It’s being too afraid to even try, that is a sin.

