settings for the old apexi avc-d
I'll take whatever you've got. As far as I know there's only one site that has anything about it. That's a japan site. Apexi usa nolonger has any more instructions and apexi japan wont answer my emails. The japanies guy sold his so he dosen't have the instructions any more but list the wiring on his site.
I had the same problem but this is what worked on the eclipse. it should work in a honda. 1,3,6,7 are on(down) and the rest are off(up). I hope this helps. keep triing to get ahold of apexi. I don't know what wire was the speed sensor, so the speed/boost("spd" knob) setting didn't work but everything else worked fine. scb is for scramble boost, hook the green(i think) to a switched ground. when the switch is flipped the boost will goto whatever the "scb" knob is set at. I don't have the harness in front of me just the box. the car is in storage.
Originally Posted by juiced2ndgenteg
I had the same problem but this is what worked on the eclipse. it should work in a honda. 1,3,6,7 are on(down) and the rest are off(up). I hope this helps. keep triing to get ahold of apexi. I don't know what wire was the speed sensor, so the speed/boost("spd" knob) setting didn't work but everything else worked fine. scb is for scramble boost, hook the green(i think) to a switched ground. when the switch is flipped the boost will goto whatever the "scb" knob is set at. I don't have the harness in front of me just the box. the car is in storage.
Oh here's other "valid" codes: 10110100,10100100
Last edited by OmegaSupreme; Feb 16, 2005 at 10:53 AM.
Originally Posted by juiced2ndgenteg
the first settings you posted is the one I posted. thanks for the color code.
Yeah I noticed that after I posted. Anyways 10110100 works for my honda


