wastegate question
got a turbonetics deltagate mark II wastegate from a guy, can anyone tell me how to adjust boost pressure on it??? can't find anything on the web thanx
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??


loosen the nut in the center and tighten down the screw but that will only get you a few lbs so it depends on what size spring is in it usually they are like 5-7 or 11-13 so to go more than what the springs are rated at you need a boost controller
__________________
John
John
we tried that.....screwing it in and out....boostgauge never left 20psi thanx
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??


haha ....wow, sounds like your missing the spring there cheif...or your not screwing it out enough....the bolt should be sticking out...but im guessing you did that...so the guy who sold it to you ripped you off and you need to find a spring for it...
__________________

Originally posted by Turbo GSR Civic 95
well if its hitting that high is the wastegate even opening? where do you have the vaccuum line hooked to the top or the side?
well if its hitting that high is the wastegate even opening? where do you have the vaccuum line hooked to the top or the side?
__________________
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??
SEE NO EVO HEAR NO EVO!
If i put half a tank of Shell V power, and half a tank of Chevron with Techron. Will i get v-tec??




