what kinda numbers are u putting down and what kinda axles are u using.

Not really interested in slicks but if ur runnin slick say what kinda axles ur using??

 

im puttin down about 300 on stock axels for a bout a year and a half now no problems yet but have used slicks either

 

not turbo but s/c 270whp 200tq stock axels

 

Driveshaft.com stage 2 (300hp). I ran 22x8 slicks for a year and never broke one with 300whp. I have made a few passes on them with 24.5x8 slicks with over 500whp and have not broke them but they were spinning badly.

 

so is it safe to safe stock axles will hold up to about 300hp

 

they're workin fine for me and i beat the shit out of my car on a regular basis too

 

Not at all. Basically there are several things that can break an axle. At the track or street(mostly track) if you "dead hook" (no wheelspin) then you will break an axle. The most comon thing is "wheel hop". All of the vibration from that just kills them. The only way to eliminate that is to add traction bars or have a good set of struts(Koni). It really depends on the driver too. If you know what breaks them then you can try to avoid it.

 

thanks guys

intel level just went up 1 pt