~Rack 'n Pinion boot broke~
Thread Starter
Registered User
Joined: Jun 2004
Posts: 7,403
Likes: 0
~Rack 'n Pinion boot broke~
should i ride it out until it breaks, or should i replace the entire unit for $280.00? no one makes a damn boot for it...so they are forcing me to replace it sumtime in the future...damn bit*hes 
Plez, input me any tipz or ideas to prevent me from spending $280
Plez, input me any tipz or ideas to prevent me from spending $280
MaDe Of MoNeY
Joined: Jan 2004
Posts: 1,834
Likes: 0
why dont they make a boot for it? You can buy them just about anywhere. Just ask for steering rack bellow.
__________________
"What shitty poorly fitted aero did you ziptie on today, after installing shitty knockoff parts that dont fit worth a damn, followed up by poorly fitted cheap heavy wheels with the wrong offset so they rub but you play it off as looking cool, and then post pics here today"
engine building &best
Joined: May 2003
Posts: 11,971
Likes: 0
you buy a universal one at autozone for 12.99 and you cut it to size i bought a whole r&p for my 89 hatchback and it did not come with it you have to buy a universal or go to honda and spend 39bucks i would replace your inners and outter rods also i did it makes it alot tighter
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
Guest
Posts: n/a
If you are replacing all the inner and outer tie rods just buy a new damn rack then.
+1 on going to autozone or napa for rack boot. take 30 minutes to do, make sure to count the # of thread it takes to get the outer tie rod off. This way you dont have to pay to get it realigned.
+1 on going to autozone or napa for rack boot. take 30 minutes to do, make sure to count the # of thread it takes to get the outer tie rod off. This way you dont have to pay to get it realigned.
