whats the cheapest and most effective way to get this swap to work??
Thread Starter
Registered User
Joined: Aug 2003
Posts: 1,114
Likes: 0
whats the cheapest and most effective way to get this swap to work??
I bought this swap-
b16a JDM Motor and Head. With JDM Tranny and Hasport Motor mounts. Axels, Spindles, Wire Harnes, Intermediate Shaft, JDM ECU, Distrubitor, Every Sensor, Larger Radiator, Intake Manafold, Alternator Starter, Fuel Rail, Fuel Injectors. Basically its everything out of a 90 si hatch.
I want to know how I can put this in my 92 civic dx without spending to much money, and changing alot of stuff, What can I re-use? What should I buy? BTW I read alot of articles on this b4 posting. I just didnt get alot of questions answered. Can I re-use the Clutch from a cable tranny? Any info is really appreciated- Just dont say something unless you know what you are talking about.
b16a JDM Motor and Head. With JDM Tranny and Hasport Motor mounts. Axels, Spindles, Wire Harnes, Intermediate Shaft, JDM ECU, Distrubitor, Every Sensor, Larger Radiator, Intake Manafold, Alternator Starter, Fuel Rail, Fuel Injectors. Basically its everything out of a 90 si hatch.
I want to know how I can put this in my 92 civic dx without spending to much money, and changing alot of stuff, What can I re-use? What should I buy? BTW I read alot of articles on this b4 posting. I just didnt get alot of questions answered. Can I re-use the Clutch from a cable tranny? Any info is really appreciated- Just dont say something unless you know what you are talking about.
MaDe Of MoNeY
Joined: Jan 2004
Posts: 1,834
Likes: 0
The transmission will not work unless you get a cable to hydro kit from hasport. Use your stock radiator. You don't need spindles. Im not sure about shift linkage.
__________________
"What shitty poorly fitted aero did you ziptie on today, after installing shitty knockoff parts that dont fit worth a damn, followed up by poorly fitted cheap heavy wheels with the wrong offset so they rub but you play it off as looking cool, and then post pics here today"
Traction Problems
Joined: Jul 2003
Posts: 662
Likes: 0
You may have to do some rewiring on the harness!!!!!
__________________
www.artofspeedproductions.com
www.artofspeedproductions.com
yO!
Joined: Jun 2002
Posts: 6,733
Likes: 0
cheap=more headaches than the IRS coming after you!!!
It cost money to have realiable and fast engine.
I would suggest someone like LHT performance to install the swap if you wanna run hydro tranny.
Good luck!
It cost money to have realiable and fast engine.
I would suggest someone like LHT performance to install the swap if you wanna run hydro tranny.
Good luck!
