Honda/Acura Tech Honda tech discussion.

EGR valve ..

Thread Tools
 
Old Jul 9, 2004 | 01:07 PM
  #1 (permalink)  
TSX24L's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 5,211
Likes: 0
Default EGR valve ..

My other crx has a code 12 that I have went thoughly and tested the vaccum on the egr vavle and it holds pressure. There is manifold vacuum. I checked the cvc vavle it holds a constant 8 like it suppose to.

Checked the 4 pin connector thats in the control box and it checks out and the egr does click. Any other things? The egr vavle is good, connectors to the ecu and wires are good. Iam stumped.

Reply
Old Jul 9, 2004 | 02:37 PM
  #2 (permalink)  
TSX24L's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 5,211
Likes: 0
Default

I know its only emissions bs but the car stalls when its cold sometimes. Its the only code on the ecu.
Reply
Old Jul 9, 2004 | 03:49 PM
  #3 (permalink)  
Josh's Avatar
Dr. Doom
 
Joined: Mar 2003
Posts: 27,320
Likes: 0
Default

have you checked your 02 sensor yet? my teg did the same thing only when it was cold.
Reply
Old Jul 9, 2004 | 04:09 PM
  #4 (permalink)  
TSX24L's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 5,211
Likes: 0
Default

wouldn't it through a code though. I will check that out. Thanks.
Reply
Old Jul 9, 2004 | 04:17 PM
  #5 (permalink)  
Josh's Avatar
Dr. Doom
 
Joined: Mar 2003
Posts: 27,320
Likes: 0
Default

mine didn't throw a code turns out it was a loose connection on the connector....it's worth checking, it's free.

Last edited by Josh; Jul 9, 2004 at 07:21 PM.
Reply




All times are GMT -8. The time now is 04:54 AM.