best rods for this..
Thread Starter
Registered User
Joined: Mar 2004
Posts: 5,211
Likes: 0
best rods for this..
What would be the better choice on rods?
I have Endyn 12.5 high comp. std rod lenght pistons. 81.5mm. Its going in a 94 ls block. And should I use a block gaurd? Iam using a stock b16 head.
I have Endyn 12.5 high comp. std rod lenght pistons. 81.5mm. Its going in a 94 ls block. And should I use a block gaurd? Iam using a stock b16 head.
Civic Racing eXperiment
Joined: Jan 2004
Posts: 4,675
Likes: 0
Re: best rods for this..
Originally posted by Captainb16
What would be the better choice on rods?
I have Endyn 12.5 high comp. std rod lenght pistons. 81.5mm. Its going in a 94 ls block. And should I use a block gaurd? Iam using a stock b16 head.
What would be the better choice on rods?
I have Endyn 12.5 high comp. std rod lenght pistons. 81.5mm. Its going in a 94 ls block. And should I use a block gaurd? Iam using a stock b16 head.
What are you planning on runnin' as far as power source?
Registered User
Joined: Sep 2001
Posts: 2,540
Likes: 0
crower, manley, pauter, carillo, etc will all get the job done but i would just go with eagles for half the price for your power goals. and youd be very lucky to get 210-220whp out of a 1.8 lsvtec
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
To make 210 plus WHP on a 81mm LS/VTEC is gonna be hard.
Aftermarket cams & good tuning will help you but what you really need is a 84mm setup to hit those numbers on pump gas with ease
Eagle rods will work just fine. Make sure you purchase rods to the spec of your r/s ratio i.e. ls eagle rods if your using an ls crank etc.
Aftermarket cams & good tuning will help you but what you really need is a 84mm setup to hit those numbers on pump gas with ease
Eagle rods will work just fine. Make sure you purchase rods to the spec of your r/s ratio i.e. ls eagle rods if your using an ls crank etc.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
