auto to manual for a four door civic?
Guest
Posts: n/a
Originally posted by `92CXhatch
i have heard of people using the Bseries del slow linkage in EG's... but i could be wrong i guess...
-Keith
i have heard of people using the Bseries del slow linkage in EG's... but i could be wrong i guess...
-Keith
If you look under the Del Sol chassis where the shift is, it is signifigantly higher than the EG and DC chassis.
We found this out the hard way on a swap we were doing into a del sol when we tried to use a regular Integra shift linkage.
For the original poster.....
To save you some confusion....try and find any 92-95 EG (2 door, 4 door or hatch. doesn't matter) and use that for your auto to manual needs.
Just don't forget that you will need a new tranny mount since the bracket in your car now is a little offset compared to a 5 speed chassis.
A decent mount (HCP Mounts part # EG-AT) can be had from www.jdmshit.com for about $130 shipped.
Hope this helps.
Guest
Posts: n/a
Originally posted by spektrum
It's possible to use, but it is a pain in the ass and in most cases....it needs to be cut for a good fit.
If you look under the Del Sol chassis where the shift is, it is signifigantly higher than the EG and DC chassis.
We found this out the hard way on a swap we were doing into a del sol when we tried to use a regular Integra shift linkage.
It's possible to use, but it is a pain in the ass and in most cases....it needs to be cut for a good fit.
If you look under the Del Sol chassis where the shift is, it is signifigantly higher than the EG and DC chassis.
We found this out the hard way on a swap we were doing into a del sol when we tried to use a regular Integra shift linkage.
-Keith
Thread Starter
Just_Pimp it
Joined: Nov 2003
Posts: 953
Likes: 0
Thanks again, Im gonna look for a 92-94 4 door shift linkage probly will be the best way and thanks for the link for the mount
__________________
"He who makes a beast of himself gets rid of the pain of being a man."
"He who makes a beast of himself gets rid of the pain of being a man."
Retired Ricer...
Joined: Jan 2003
Posts: 11,813
Likes: 0
Im almost positive I have the linkage, shift boot, master cylinder, and slave cylinder... make an offer... 
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
I miss my cx motor
Joined: Jun 2003
Posts: 756
Likes: 0
i got a gsr shift linkage and shifter in mine and it works fine with a b18b
+1 for the 4-door!
+1 for the 4-door!
__________________
***!! will pay $$$ for: Black GSR leather front seats and a 92-95 hatch black cargo cover !!***
***!! will pay $$$ for: Black GSR leather front seats and a 92-95 hatch black cargo cover !!***
Thread Starter
Just_Pimp it
Joined: Nov 2003
Posts: 953
Likes: 0
Damn skunk2eg, Nice car in your gallery. Is it yours? If so Where did you get the swap done or did you do it yourself? Was yours a auto or manual?
__________________
"He who makes a beast of himself gets rid of the pain of being a man."
"He who makes a beast of himself gets rid of the pain of being a man."
