View Poll Results: What motor swap do you think I should go with in a crx
B20



4
8.16%
B18C5



17
34.69%
LS V-TEC



17
34.69%
H22



11
22.45%
Voters: 49. You may not vote on this poll
What motor should I use
if you put the h22 in it it wont be that nice on the roads of florida due to not enough room for a/c and florida is hot as hell but you will probably get the fastes times from the h22, if you go with a b-series and you don't like it you can still change to another b-serieswithout too many mods
__________________


The h22a motor does not fit right into a crx without basically cutting the firewall out around the intake manifold and rebuilding another in its place that makes room for the motor to sit back as far as possible so the axles will sit inside the front forks. All the mounts would need to be custom made along with some sort of custom hybrid axles or custom axles altogether. For me I wouldn't even worry about the weight issue that much but I would worry about the axle angles. Basically if you are not going to do this yourself you are going to pay alot for someone to do it. And if you do do it yourself you need to be a good fabricator or you will waste alot of time.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
pm me if you are interested in trying a free class at any of the gyms.
what about an old school b17 gsr swap i had one in my old rex and it was crazy. turbo that also couldnt be more than a stock ITR... idk
__________________
TR's drive my car more than 2500 miles in less than a month crew member #01
TR's drive my car more than 2500 miles in less than a month crew member #01


(built of course)