400whp Uberdata :p
Thread Starter
Registered User
Joined: Sep 2006
Posts: 9,924
Likes: 0
400whp Uberdata :p
http://www.ecimulti.org/uberdata/for...y;threadid=345
Willis is from orlando I believe, w00t
Free obd1 honda standalone software 
Willis is from orlando I believe, w00t
Free obd1 honda standalone software
I decided to give uberdata a try on my friends turbo b16 civic since it now has 3 bar support....
Here's the setup:
b16a block
Je 9:1 pistons
crower rods
GE blockguard
unported b16a head
ferrea valvetrain
type r cams
precision sc61
3" downpipe and exhaust
VP C16 fuel
880cc injectors
The tuning went smoothly until I started to bring it past 17 psi. No matter what I did it would not run any leaner than 10.8-11.1. I pulled 10% out of the 23 psi column between two runs running about 20-21 psi boost and there was no change at all to the a/f ratio. This made me nervous, as the 23 psi fuel values were getting real close to those in the 17 psi column. So I turned it back down to 17 psi for now.
I had no problems at all with boost levels below 17 psi, I was able to get a just about solid 12.8:1 across the board from 10 -17 psi.
I think someone else on this forum had a similar problem as well. Also,I am using the latest version of the software from this website. I'm pretty sure this has to be a bug in the software..just thought I'd let you guys know about it.
Here's the setup:
b16a block
Je 9:1 pistons
crower rods
GE blockguard
unported b16a head
ferrea valvetrain
type r cams
precision sc61
3" downpipe and exhaust
VP C16 fuel
880cc injectors
The tuning went smoothly until I started to bring it past 17 psi. No matter what I did it would not run any leaner than 10.8-11.1. I pulled 10% out of the 23 psi column between two runs running about 20-21 psi boost and there was no change at all to the a/f ratio. This made me nervous, as the 23 psi fuel values were getting real close to those in the 17 psi column. So I turned it back down to 17 psi for now.
I had no problems at all with boost levels below 17 psi, I was able to get a just about solid 12.8:1 across the board from 10 -17 psi.
I think someone else on this forum had a similar problem as well. Also,I am using the latest version of the software from this website. I'm pretty sure this has to be a bug in the software..just thought I'd let you guys know about it.
Registered User
Joined: Aug 2003
Posts: 1,179
Likes: 0
Yeah me too since i am planning a heavy boosting project in the future on my b16a i want to see the potential of the b16a, and what i can look forward too.....My hatch would fly with 23 psi, even with 17 psi it would be a rocket...i would own.
Thread Starter
Registered User
Joined: Sep 2006
Posts: 9,924
Likes: 0
Originally posted by Me2
So how much Hp is he putting out at 17 psi? thats a nice setup, keep us updated on the project, i really want to know the horsepower at 23 psi... -Ben
So how much Hp is he putting out at 17 psi? thats a nice setup, keep us updated on the project, i really want to know the horsepower at 23 psi... -Ben
I was just posting this as a shameless plug ^^ it made 406whp @ 17
bored at work
Joined: Oct 2000
Posts: 4,263
Likes: 0
good work Blake. Is that the record so far?
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richeypm me if you are interested in trying a free class at any of the gyms.
