alright... sorry for all the questions but as most know from reading previous posts of mine i have decided to go the route of N/A. is there a difference in what sized "performance" throttle body i should get when going just n/a instead of forced induction i read somewhere that 87mm would be good. personally i dont know the stock ? and the same question for injectors. what size... also what would be the best brand to go with... i was thinking venom but not completely sure.

 

ok 87 mm that is huge. n/a depends on how ur gonna build ur motor on what ur gonna need. most people that go n/a jsut get a type r throttle body which is 62mm or u can get like a jg edelbrock 65 mm or something like that.
for injectors stock is 240cc on mostly all honda except the newer preludes which are 270s .
some people run newer prelude or u can get some RC injectors that are really nice. It all depends on ur setup of what u will get.

Good luck

 

o an please post what kinda motor u wnat to build cause that will make a differance on what to get waht i was talking about was Bseries engines

 

87mm in my opinion is way too big for all motor applications either 62mm from a type R or like 65mm from jg. jg has a good throttle body ready to be bolted up seeing that it comes with the tps, as for injectors 240cc should be ok, but all depends on your motor, setup, etc.

 

i have a 94 prelude... so i hopefully wont be putting a b series in it. i will be building a h22a vtec for the n/a set up for my lude. a type r throttle body will fit a h series motor? woudnt preludes, due to having a larger motor then the b series motors, need a bigger throttle body even for a n/a set up? i have heard really good things about RC injectors. what is the purpose of switching out the throttle body for a larger one or even a different one then the stock. 240cc.... the stock amount would be sufficient for an n/a set up when it comes to injectors? i know that i have seen an h23a set up in a prelude running 720 cc injectors but he was turboed.