has anyone built a home made turbo kit using a 14b 1g eclipse turbo on a 1988 crx si? I was told that the wastegate acuator wont clear the block??? is this true? if so whats the best way to deal with this? should i die grind some of the block to make way for the wastegate? or is there a way to extend the exhaust bolts and make some sort of spacer for the exhaust manifold?

thanxs

 

I have done those kits several times.I bent the actuator so it would clear and didnt have a prob.I have everything u will need to pretty much build a kit.If u need help installing it or need parts pm me.Best bang for the buck and good luck.

 

the only thing i am missing is the oil line to feed the turbo, i didnt know whether to use a high pressure rubber hose, hard line, or flex line, if uknow where i can get one that would be very helpful

 

Get a braided one to handle pressure.Street Performance(571-0500)sells them at a reasonable price.He also has all the fitting u need to install it.

 

www.homemadeturbo.com will help you out