eclipse turbo exh. manifold
Thread Starter
Registered User
Joined: Feb 2004
Posts: 461
Likes: 0
eclipse turbo exh. manifold
i have a 93 accord, and I heard that you could use a 1st gen DSM turbo exh. manifold in conjunction with a Z31 turbo and it would work pretty good. Does anyone know anything about this?
i stepped on my weiner!
Joined: Oct 2002
Posts: 2,994
Likes: 0
you ca, i have seen a thread on hondatech about it, i hear it is very close as far as matching up and works well, search on there for it
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Guest
Posts: n/a
By Z31, I assume you mean the t25. The t3 Z31 turbo will not bolt up to a mitsu manifold... Then again, a t25 wont bolt up to the 1g DSM manifold either... I have no idea where you got this information, but the latter part is incorrect.
You would require a 14b for that manifold.
You would require a 14b for that manifold.
