KJ **D16Y7 head volume per cylinder??
Thread Starter
RedNeck Refab.Inc
Joined: Oct 2001
Posts: 578
Likes: 0
KJ **D16Y7 head volume per cylinder??
I believe the a6 is around 7.2cc,
anyone know if the d157 bottom will fit the 16y7 head? using the 9.5/6 to 1 hf pistons w/ a set of 90 mm rods from a b7 or a6?
Or the formula to process valve to piston clearance on this set up?
running a pr3 w/ an L3 trannie maybe my zc??
can you run an si dizzy (evan an hf) on a y7 vtec head? or is y7 dizzy obd1
I thought it was posible to run a pr3 on a sohc non obd0 a6/b7?
Can anyone spare some thought?
Thanks Cole 8133763432
anyone know if the d157 bottom will fit the 16y7 head? using the 9.5/6 to 1 hf pistons w/ a set of 90 mm rods from a b7 or a6?
Or the formula to process valve to piston clearance on this set up?
running a pr3 w/ an L3 trannie maybe my zc??
can you run an si dizzy (evan an hf) on a y7 vtec head? or is y7 dizzy obd1
I thought it was posible to run a pr3 on a sohc non obd0 a6/b7?
Can anyone spare some thought?
Thanks Cole 8133763432
bored at work
Joined: Oct 2000
Posts: 4,263
Likes: 0
volume is 34.6cc's. I think some of your length figures are off. the b7 rods are 134mm. Not sure about the distributors but I think it may bolt up.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richeypm me if you are interested in trying a free class at any of the gyms.
