Hondata question
i have a dumb question and i am hoping for a good answer
with hondata
can u install lets say the s200 and the injectors and drive around like that for like 300-500 miles on really low boost before getting it tuned.
with hondata
can u install lets say the s200 and the injectors and drive around like that for like 300-500 miles on really low boost before getting it tuned.
__________________
The Myspace Page
Hero's arent born there american
made.
Aco. 53rd CSB LTF - TMT - 1st SQD
Afganistan Tour 2005 - 2006
- Its Game Time -
The Myspace Page
Hero's arent born there american
made.
Aco. 53rd CSB LTF - TMT - 1st SQD
Afganistan Tour 2005 - 2006
- Its Game Time -
If you purchase S200 with the rom editor, you can tune your vehicle yourself. Otherwise, you can get a base map, from whomever you purchase the s200 from, with a base program for your specific injectors that should work for you to make it for a short while, before you do further tuning. Just stay out of boost to be "safe". I would recommend not boosting at all.
__________________
99 gsr
- B18b -
349 whp - 299 ft/lb
99 gsr
- B18b -
349 whp - 299 ft/lb
Originally posted by tegasaurus
Otherwise, you can get a base map, from whomever you purchase the s200 from, with a base program for your specific injectors that should work for you to make it for a short while, before you do further tuning. Just stay out of boost to be "safe". I would recommend not boosting at all.
Otherwise, you can get a base map, from whomever you purchase the s200 from, with a base program for your specific injectors that should work for you to make it for a short while, before you do further tuning. Just stay out of boost to be "safe". I would recommend not boosting at all.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
thanks alot that really answered my question. i wanted to install my kit in tally and drive down to tampa to get it tuned.
how do u not boost when u have a turn kit installed do u ride with a open wastegate
how do u not boost when u have a turn kit installed do u ride with a open wastegate
__________________
The Myspace Page
Hero's arent born there american
made.
Aco. 53rd CSB LTF - TMT - 1st SQD
Afganistan Tour 2005 - 2006
- Its Game Time -
The Myspace Page
Hero's arent born there american
made.
Aco. 53rd CSB LTF - TMT - 1st SQD
Afganistan Tour 2005 - 2006
- Its Game Time -
You can take the wastegate spring out and stay off the throttle so you can stay in vacuum.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
You can drive as far as you like staying out of boost. Boost is throttle dependant. You can stay in vaccum at any rpm you like, just drive with light throttle. No need to take the wg spring out.
__________________
99 gsr
- B18b -
349 whp - 299 ft/lb
99 gsr
- B18b -
349 whp - 299 ft/lb
Some people can't contain theirself on the interstate
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead


