idle is high help

Reply Subscribe

Thread Tools

Jan 27, 2004 | 02:07 PM

#1 (permalink)

Philly Blunt

Thread Starter

TR Balla Donor Supreme

Joined: Oct 2003

Posts: 3,866

Likes: 0

idle is high help

i have a b16 but it has a small ls throttle body so i put the b16 t/b on and it idles at like 1800 i have a small piece of the gasket missing though is that the only reason it would do that or could it be the map sensor

Jan 27, 2004 | 02:19 PM

#2 (permalink)

99B16Si

Registered User

Joined: Sep 2001

Posts: 2,540

Likes: 0

if the gasket is leaking you have a vacuum leak and it will cause the motor to idle high and irradic. get a new gasket for like 5 bucks and make sure u scrape all of the old one off both the maifold and TB first

Jan 27, 2004 | 02:20 PM

#3 (permalink)

Cronic

Guest

Posts: n/a

LS and B16 are the same. Only different ones are Type-R, and H22. Sounds like your problem might be a vacuum leak?

Jan 27, 2004 | 02:22 PM

#4 (permalink)

Philly Blunt

Thread Starter

TR Balla Donor Supreme

Joined: Oct 2003

Posts: 3,866

Likes: 0

oh, well i held the ls t/b up to the b16 t/b wich i think is a b16 and there is like 2-4mm difference maybe i have a different t/b

__________________

Jan 27, 2004 | 02:25 PM

#5 (permalink)

Philly Blunt

Thread Starter

TR Balla Donor Supreme

Joined: Oct 2003

Posts: 3,866

Likes: 0

what size is the h22 t/b and what size is ls t/b

__________________

Jan 27, 2004 | 02:25 PM

#6 (permalink)

Cronic

Guest

Posts: n/a

All D and B series are the same except for Type-R. I think they're like 58mm? I don't remember exactly off the top of my head. I think ITR is 60mm, and H22 is 62mm?

Jan 27, 2004 | 02:30 PM

#7 (permalink)

redcrx187

ALL MOTOR LS/VTEC

Joined: Apr 2003

Posts: 174

Likes: 0

type r is the largest t body to fit a b series. h22 and newer b16 have the same size t boby. d series is smaller than b16.

Jan 27, 2004 | 02:39 PM

#8 (permalink)

Cronic

Guest

Posts: n/a

Allow me to correct myself... (edited)
It's been a while since I've used this info, so bare with my fixes.

D series is 56mm, B series is 60mm, ITR is 62mm, and I guess H22 (which will also fit any D or B series) is 60.

Refer to https://www.tamparacing.com/forums/s...+throttle+body OR http://www.honda-tech.com/zerothread?id=335078&page=1

I did a simple search on TR and got the answers.

Last edited by Cronic; Jan 27, 2004 at 02:44 PM.

Jan 27, 2004 | 02:58 PM

#9 (permalink)

Philly Blunt

Thread Starter

TR Balla Donor Supreme

Joined: Oct 2003

Posts: 3,866

Likes: 0

hey someone help me out how many mm are in a cm and how many cm are in an inch i swear to god my brain went completely dead and i cant fucking think of it i think i need to go back to first grade god dammit i am really pissed now

__________________