I looked all over the car and found now port to plug an OBDII scanner into to check my Check engine light?
It has to have one its an OBDII...
where is it???

If not isnt there a plug next to the ECU on the passenger side kick panel i can check..

I was under the impression to that there would be a plug down there with a 2 pin connecter and to loop that connector with a paper clip, and then put the key in the ignition and watch for the code to flash on the check engine...


By the way im trying to read a code that i believe is for my transmission.
anyone one got an instructions link?

 

under the ash tray or behind the consoule on the right hand side ! i think its under the ashtray though !

 

DAMN Double POSTS!

 

You are correct, here is a decent instruction page. I know it for an Acura CL, but the Accord and CL are 90% the same.

http://home.insightbb.com/~niedejb/refs2.html

 

I got it... Its a tranny code... the Overdrive 4 display on the gauge cluster indicates its a tranny code 15...

The Check engine light blinks consitant 7's but i dont think it means anything??? just to indicate its displaying a code for the tranny...

Now i gots to go find a site or get the book to see what code that is.

 

I am looking right now for you on my electronic manual.

 

awesome thanks bro... saves me a trip to discount auto to look in there haines book.

 

Go here... http://web.tampabay.rr.com/aaron1 there is a foler with your name on it!

I have the Mitchell On-Demand System for computers if you want it. I only have the CD that contains the Honda/Acura files. Just give me a blank CD and I will burn it!

 

here is a quick tip for others that have this problem . under the steering colum cover there is a sticker that tells you the location of the obd2 port to plug a scanner in.

 

the code 7 is the TPS sensor(throttle position sensor) .......