Budget turbo for sohc
Thread Starter
Registered User
Joined: Jul 2002
Posts: 920
Likes: 0
Budget turbo for sohc
any ideas, im new to the turbo world, but i want to turbo my d15, i heard it was pretty easy and fairly cheap, any help and ideas of where to go to get parts and stuff will help
as far as turbo's go, they are all the same for me, I just want something that will work for my application but wont break the bank, im going to have less than $1,000 to go with.
all help appreciated...thanks
as far as turbo's go, they are all the same for me, I just want something that will work for my application but wont break the bank, im going to have less than $1,000 to go with.
all help appreciated...thanks
:mugen member:
Joined: May 2002
Posts: 689
Likes: 0
you can use a HF header from a 88-91 crx,then fabricate the turbo to it
weld a down pipe,weld a pipe to reach the TB & turbo,get an after market Fuel press.reg...run 6-8psi
and hope the rings hold up.......CMR turbo can do the welding....
thats on a budget!
weld a down pipe,weld a pipe to reach the TB & turbo,get an after market Fuel press.reg...run 6-8psi
and hope the rings hold up.......CMR turbo can do the welding....
thats on a budget!
__________________
813-377-5505
813-377-5505
Where racing is a pleasur
Joined: Dec 2002
Posts: 2,112
Likes: 0
www.homemadeturbo.com
Best people, best site.
$1200 car ( 89' H/B )
$1100 engine and turbo system
14.6@94mph on 10psi and slipping stock clutch
All B/c that site.
Best people, best site.
$1200 car ( 89' H/B )
$1100 engine and turbo system
14.6@94mph on 10psi and slipping stock clutch
All B/c that site.
__________________
86' snapper electric powered lawn mower.
95' F-350 crew-cab powerstroke 5-speed 21.63mpg
03' G35 6-speed coupe. Grey on black.
02' wranlger apex edition with EFI 5.0L 302 SBF. 5.5'' lift, custom 4-link 8.8 in the rear, high pinion D30 front with locker.
A wise man once said, " I didn't wash my hands b/c my D**K is cleaner then ANYTHING, in that bathroom"
86' snapper electric powered lawn mower.
95' F-350 crew-cab powerstroke 5-speed 21.63mpg
03' G35 6-speed coupe. Grey on black.
02' wranlger apex edition with EFI 5.0L 302 SBF. 5.5'' lift, custom 4-link 8.8 in the rear, high pinion D30 front with locker.
A wise man once said, " I didn't wash my hands b/c my D**K is cleaner then ANYTHING, in that bathroom"
engine building &best
Joined: May 2003
Posts: 11,971
Likes: 0
i have a 6-11Psi turbo working great clean And some Hf manifolds pm me
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?
175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!
how many speed holes do i need in my bumper,b4 i can run 15's?
Living the dream
Joined: May 2002
Posts: 3,272
Likes: 0
MAtt
__________________
pwns.
Joined: Nov 2000
Posts: 12,937
Likes: 0
ive got the manifold, adaptor plate, intercooler, bov, and a little bit of the piping if you go home-made. PM me if interested.
__________________
Originally Posted by Lil Ze
Florida is the new Miami through and through.
