I am considering building my Teg into a more able all motor contender. I already know that I have to have the head ported and cleaned a little. I also know that I am going to have to get a new valvetrain for more RPM's. My question is which company makes the best all motor Honda cams? I was thinking about the Skunk2 Stage 2's or the Toda Bspec (I think that's right).
I am also thinking about running 12:1 pistons in it. Will that be streetable, or more track only with no bottom end power? I am going to get Hondata and tune the car just after the build.
One more question...where in the area can I get M&H slicks?

 

Toda-b IS THE shit
then Skunk2
Or Type-R..........+1
MY 2 cents......

 

I already have Type R cams in the head, I was looking for a little more power. These are my motor mods as of today:
Skunk2 Intake manifold
Type R cams
11:1 pistons
DC 4-2-1 Header Factory ECU

 

Toda B = best cam for street driven all motor hondas. hands down. end of discussion

 

So I could go with a Toda valvetrain and Spec B cams. Any good porting shops in the area?

 

theres lots of power to be found in the head. i wouldnt go much above 11.5:1 for the street....definetly go toda b's and port the shit out of it...

 

Manufacturer / Intake / Exhaust
EF-1 m24 cams 12.1 mm, duration - 258 @1mm 12.1 mm, duration - 258 @1mm


Toda Spec A 11.6 mm, duration - 250 @ 1mm 11.2mm, duration - 240 @ 1mm
Toda Spec B 12 mm,duration - 255 @ 1mm 12 mm, duration - 245 @ 1mm
Toda Spec C 12.5 mm,duration - 255 @ 1mm 12.5 mm, duration - 255 @ 1mm

Jun Type 1 10.9 mm, duration - 265.3 @ 1mm 10.0 mm, duration - 268 @ 1mm
Jun Type 2 12.0 mm, duration - 266.6 @ 1mm 10.9 mm, duration - 265.3 @ 1mm
Jun Type 3 12.0 mm, duration - 265.3 @ 1mm 11.5 mm, duration - 265.3 @ 1mm


Spoon Sports 11.53 mm, duration - 256 @ 1mm 11.13 mm, duration - 245 @ 1mm

Skunk 2 stage1 11.58 mm, duration 252 @ 1mm 10.9 mm, duration 249 @ 1mm
Skunk2 stage 2 12.3 mm, duration 266 @ 1mm 11.8 mm, duration 262 @ 1mm
Skunk2 stage 3 12.8 mm, duration 273 @ 1mm 11.5 mm, duration 273 @ 1mm

Crower 63400 10.69 mm, duration - 244 @ 1mm 9.83 mm, duration - 231 @ 1mm
Crower 63401 11.38 mm, duration - 249 @ 1mm 10.54 mm, duration - 240 @ 1mm
Crower 63401T 11.81 mm, duration - 240 @ 1mm 11.30 mm, duration - 237 @ 1mm
Crower 63402 11.84 mm, duration - 258 @ 1mm 11.84 mm, duration - 251 @ 1mm
Crower 63402A 11.84 mm, duration - 246 @ 1mm 11.81 mm, duration - 239 @ 1mm
Crower 63403 12.04 mm, duration - 267 @ 1mm 11.84 mm, duration - 257 @ 1mm

Integra Type R 11.5 mm, duration - 240 @ 1mm 10.5 mm, duration - 235 @ 1mm
Civic Type R 11.5mm, duration - 243 @ 1mm 10.5 mm, duration - 235 @ 1mm


Nuff said.

 

What do you guys think about Jun 3 cams?/

I was debating on getting some Toda C's or Jun 3's? Let me know. Thanks