I think i finally found out where the my oil leak is from.I did the powder thing and put a rag under the oil filter and rag was the only thing soaked.There was no trace of oil on the pan where the powder was so i'm blaming the housing.The oil sender was replaced so it s not the cause.I have a zc with a oil cooler housing and was wondering if its replaceable or can be bypassed.
thanx in advance.

 

Theres O-Rings underneath the housing and on the end of the shaft...Take it off the block and you will see O-Rings...

Replace them and all should be well...

 

damn i didnt know that i'll ask zmr if they will do it