Honda/Acura Tech Honda tech discussion.

how good

Thread Tools
 
Old Dec 3, 2003 | 05:30 PM
  #1 (permalink)  
prican's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 309
Likes: 0
Default how good

how good is a tdo5h turbo on a stock del sol eng. and how high can i boost it up...also what would be good for me too do?????around how much hp wil i get with the tdo5h turbo, fmic? will an ls fule pump work enough for me????
Reply
Old Dec 4, 2003 | 04:47 PM
  #2 (permalink)  
prican's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 309
Likes: 0
Default

i still need help?????
__________________

R.A.P.S member number #0006
Rotaries
Against
Piston
Swaps
msn: prican8069
yahoo: ltorovelez
aim: ltorovelez
Reply
Old Dec 4, 2003 | 05:09 PM
  #3 (permalink)  
InsaneCivicCoupe's Avatar
Retired Ricer...
 
Joined: Jan 2003
Posts: 11,813
Likes: 0
Default

on a stock single cam i would only suggest around 5 psi or so and you should definately upgrade your fuel if you plan on boosting higher in the future.... right now to only boost about 5-6psi on your stock motor you shouldnt need fuel upgrades except for maybe a pressure regulator or somethin along those lines... stock pump and injectors will do the trick... if you want to do it right though, i suggest saving your money and either get a swap or start building the single cam motor... give me some more info on what your goals are and what modifications you currently have as well as those you plan on making, and i will try to help you out to the best of my knowledge....
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Reply
Old Dec 4, 2003 | 05:38 PM
  #4 (permalink)  
prican's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 309
Likes: 0
Default

i have an ls fule pump.....should i shange the pistons or what should i do i want to get the best out of tha single cam is an si
__________________

R.A.P.S member number #0006
Rotaries
Against
Piston
Swaps
msn: prican8069
yahoo: ltorovelez
aim: ltorovelez
Reply
Old Dec 4, 2003 | 05:41 PM
  #5 (permalink)  
InsaneCivicCoupe's Avatar
Retired Ricer...
 
Joined: Jan 2003
Posts: 11,813
Likes: 0
Default

i would at least get aftermarket rods suck as eagle or crower, and some low compression pistons like JEs or somthing..... this will give u a little more to play with... build it right the first time and you should be happy with the results
__________________

www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Reply
Old Dec 4, 2003 | 05:49 PM
  #6 (permalink)  
prican's Avatar
Thread Starter
Registered User
 
Joined: Oct 2003
Posts: 309
Likes: 0
Default

around how much the pistons and rod cost me.......also is the ls fule pump good enough????? will i need injectors????
__________________

R.A.P.S member number #0006
Rotaries
Against
Piston
Swaps
msn: prican8069
yahoo: ltorovelez
aim: ltorovelez
Reply
Old Dec 4, 2003 | 05:54 PM
  #7 (permalink)  
pressuredsol's Avatar
Pleasure the do me
 
Joined: Jun 2003
Posts: 4,256
Likes: 0
Default

450's, afc, manifold, piping, intercooler, a/f gauge, boost gauge, boost controller, and alot of patience.
__________________
Reply




All times are GMT -8. The time now is 06:52 AM.