440 RC injectors too big??
u gotta come to the show. i have a project CRX Hf (track only no title), i don't want the stock motor b/c it has 163,000 miles on it and is having issures already) so me and my partner in the car are purphosely blowing it up w/ a nice big shot. its gonna be fun. i'm putting that LS motor i have into that CRX. i've just heard of many bad experiences w/ nitrous. that's why i don't touch it. i wouldn't wanna mess up anything.
__________________
Semper Fi
Aim and Yahoo- Inkedupordie
Semper Fi
Aim and Yahoo- Inkedupordie
When and where is the show? I'll have to check it out. How big of a shot do you plan on giving it?
__________________
-00 Civic EX Coupe BUILT D16Y8, Precision SC50, 12.80@105.8 14psi
-00 Chevrolet S10 LS 4.3L V6 Gas Guzzler
http://www.Sohchonda.com
Honda SOHC & D Series Resource
-00 Civic EX Coupe BUILT D16Y8, Precision SC50, 12.80@105.8 14psi
-00 Chevrolet S10 LS 4.3L V6 Gas Guzzler
http://www.Sohchonda.com
Honda SOHC & D Series Resource
sometime w/ in the next month, we are gonna run it once no nitrous just intake and straight pipe to see what it can do just gutted to nothing, than w/ a 75 shot (it wont blow it) than finally we are gonna go open fogger, just put the line right in, 300 shot. i was thinking only a 150 b/c i personally don't want a rod flyin threw the firewal and breaking my leg, he wants 300 b/c he's not the one driving.
__________________
Semper Fi
Aim and Yahoo- Inkedupordie
Semper Fi
Aim and Yahoo- Inkedupordie
I'm looking to put down 230-250whp on nitrous alone. When I go boost I want to aim for 250-300whp on boost, then a 55-75 shot depending on how much I make on boost, I want right around 350whp which is the max the 550cc injectors can handle.
Definately let me know when the meeting is, I gotta see this. The 150 shot would defintately be sufficient in destroying a stock D16. If your rod flys out its likely to go through the oil pan into the ground so you should be fine.
Definately let me know when the meeting is, I gotta see this. The 150 shot would defintately be sufficient in destroying a stock D16. If your rod flys out its likely to go through the oil pan into the ground so you should be fine.
__________________
-00 Civic EX Coupe BUILT D16Y8, Precision SC50, 12.80@105.8 14psi
-00 Chevrolet S10 LS 4.3L V6 Gas Guzzler
http://www.Sohchonda.com
Honda SOHC & D Series Resource
-00 Civic EX Coupe BUILT D16Y8, Precision SC50, 12.80@105.8 14psi
-00 Chevrolet S10 LS 4.3L V6 Gas Guzzler
http://www.Sohchonda.com
Honda SOHC & D Series Resource
Originally posted by NChatch
are 440 RC injectors to big for a turbo B16?, i have an safc and just cant seem to lean it out enough.
i should use hondata
any info, is good to go
are 440 RC injectors to big for a turbo B16?, i have an safc and just cant seem to lean it out enough.
i should use hondata
any info, is good to go
i know, i got jacked.......
but to add to the discussion, i made 311@ the wheels, with my fuel pegging the meter on the rich scale
but to add to the discussion, i made 311@ the wheels, with my fuel pegging the meter on the rich scale
__________________
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
.
10.02@149.5 Bullseye Power Turbos
Top Dead Center Performance
Mobile Alabama 251 661 6067
owner/operator
www.tdcperformance.net
Contact Lee at Cybernation Motorsports in Fort Lauderdale...
They have been able to run 550cc injectors on all OBD1 and OBD2 Honda/Acura Stock ECUs, make 500+HP and idle at 750RPM...
www.cybernationmotorsports.com
You want the Black Magic PiggyBack that is a Cybernation Exclusive...
(954) 523-8483
Zee
They have been able to run 550cc injectors on all OBD1 and OBD2 Honda/Acura Stock ECUs, make 500+HP and idle at 750RPM...
www.cybernationmotorsports.com
You want the Black Magic PiggyBack that is a Cybernation Exclusive...
(954) 523-8483
Zee
__________________
I work too damn Hard...
04 Civic Si
01 Lexus GS300
I work too damn Hard...
04 Civic Si
01 Lexus GS300



