will the rear disc for an 88 integra fit an 88 crx si? I know the 94 del sol bolts right in is the teg the same?

 

Yes, use the same swap procedure as you would a 90-93 teg

Zee

 

whats the swap procedure, do I just unbolt the arms from the body and modify the e-brake to attach to the lever, which cable would be best.

 

NO it won't work!!!!!!!!you need 90 and up teg or del sol or 90-91 cr-x si...........with thoes you need NO fabrication just bolt it in..........


_Jason

 

I have a friend that is selling a rear disk conv. it has everything even polly bushings.....

his name is ken 727-423-6396 leave a message and tell him jason told you about it......



_Jason

 

For a crx you can use the following rear trailing arm/brake setups for rear disc swaps.

90-91 crx si
92-95 civic si
90+ integra (any year/model, abs or non abs it doesn't matter)

For the e-brake cables you need 90-91 crx si. The teg ones and civic ones are too long and would require some creative routing if you did decide to try them.

 

Since it is an 88 you may need the lca too, but I'm not 100%.

 

the e-brake cables work even thoe they are 2 long use zip ties 2 hold them up ..... i've had the swap for 4 1/2 years on my 90 si hatch and it came from a 91 teg. including the e-brake cables....

 

yeah for the hatch it works. For the crx they are a little too long. It could still work but the crx si ones will fit alot better.

 

Why can't you use the 88 Integra Rear Disc Brakes?

Zee