GM Tech - Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn Tech Technical Discussion for General Motors Products both past and present

383 96 s-10

Thread Tools
 
Old Jul 27, 2010 | 09:04 PM
  #1 (permalink)  
mattlock's Avatar
Thread Starter
Registered User
 
Joined: Jan 2008
Posts: 291
Likes: 0
Question 383 96 s-10

need advice on how to do it i have the motor mounts and headers but will my stock manual tranny bolt up and what should i do about fuel?
Reply
Old Jul 28, 2010 | 03:00 AM
  #2 (permalink)  
J@meson's Avatar
Resident Ginger Kid...
 
Joined: Jul 2006
Posts: 3,172
Likes: 0
Default

what engine did the car have in it before... 2.2 or 4.3?
__________________

2005 Joe Gibbs Silverado # 0396
1988 Monte Carlo SS 5.3/T56 and too many mods.
2003 Honda 954RR
Reply
Old Jul 28, 2010 | 07:28 AM
  #3 (permalink)  
h4scoobie's Avatar
Registered User
 
Joined: Nov 2008
Posts: 572
Likes: 0
Default

Originally Posted by mattlock
need advice on how to do it i have the motor mounts and headers but will my stock manual tranny bolt up and what should i do about fuel?
The stock trans will bolt up if it were a 4.3, but still that trans isnt made for the new amount of TQ. Fuel is easy, run a mechanical pump on the engine (If you going Carb'd) And you can run a fuel cell. Or run what system you have with a restrictor. Everything can be found of summit.
Reply
Old Aug 5, 2010 | 07:57 PM
  #4 (permalink)  
mattlock's Avatar
Thread Starter
Registered User
 
Joined: Jan 2008
Posts: 291
Likes: 0
Default

thanks guys what trans should i get i want to keep it a manual and will i have to mess with the fire wall?
Reply
Old Aug 20, 2010 | 05:13 PM
  #5 (permalink)  
2kSnakeater's Avatar
Pastafarian FOR LIFE!!!!!
 
Joined: Jan 2006
Posts: 3,444
Likes: 0
Default

Originally Posted by mattlock
thanks guys what trans should i get i want to keep it a manual and will i have to mess with the fire wall?
T56, also hit me up if you need anything for the swap. I bought the full swap and never got around to doing it before I sold my Bravada. I still have 90% of all the parts needed for an S10 v8 conversion.
__________________
sig under construction
Reply
Old Aug 27, 2010 | 07:46 AM
  #6 (permalink)  
bisscrac's Avatar
Registered User
 
Joined: Feb 2010
Posts: 1,063
Likes: 0
Default

S10 V8 Swap/Conversion Community


look around here all the info on this site is solid
__________________


私の狂気にそこに方法があります
https://www.facebook.com/groups/534257953308376/
Reply




All times are GMT -8. The time now is 04:39 PM.