Dyno Day, Aug 8th
Fordspeed Racing Dyno Day
Satuday, August 8th 9:00am till we finish
We are located directly behind Grease Monkey Garage(the big yellow building facing 66th Street) on the corner of 66th Street and 118th Avenue. Just drive around back. If you want to MapQuest it, here is the physical address:
11733 66th Street North
Unit #123
Largo, Florida
33773
We are offering 2 dyno pulls with horsepower, torque and air/fuel readings for $30.00, or if you want, we will do 3 pulls for $45.00. No tuning in between runs, if you need to make small adjustment and it can be done quickly I do not mind.
Josh(MiDiablo)will bring the bbq, he is also going to have some samples of his upholstery work. He has done a few jobs allready for T.R. members, and would love to take care of you guys. Get together with the other members and put together a list of food everyone is bringing, we have a ice machine at the shop so bring some coolers.
I have a few local race cars that we have built, sponsor, or worked on lined up so everyone can check them out and see some of the work we do at the shop.
If you are definitely going to put your car on the rollers, please let me know and I will put you at the top of the list. I'm going to open this up to a few other local forums and I would like to make sure you get taken care of first. If you know anyone else who is not a member here but would like to participate they are more than welcome, just pass the info along.
Just want to thank Zate for being on board, and letting me post this up for us.
Adam
cochese51105@gmail.com
Satuday, August 8th 9:00am till we finish
We are located directly behind Grease Monkey Garage(the big yellow building facing 66th Street) on the corner of 66th Street and 118th Avenue. Just drive around back. If you want to MapQuest it, here is the physical address:
11733 66th Street North
Unit #123
Largo, Florida
33773
We are offering 2 dyno pulls with horsepower, torque and air/fuel readings for $30.00, or if you want, we will do 3 pulls for $45.00. No tuning in between runs, if you need to make small adjustment and it can be done quickly I do not mind.
Josh(MiDiablo)will bring the bbq, he is also going to have some samples of his upholstery work. He has done a few jobs allready for T.R. members, and would love to take care of you guys. Get together with the other members and put together a list of food everyone is bringing, we have a ice machine at the shop so bring some coolers.
I have a few local race cars that we have built, sponsor, or worked on lined up so everyone can check them out and see some of the work we do at the shop.
If you are definitely going to put your car on the rollers, please let me know and I will put you at the top of the list. I'm going to open this up to a few other local forums and I would like to make sure you get taken care of first. If you know anyone else who is not a member here but would like to participate they are more than welcome, just pass the info along.
Just want to thank Zate for being on board, and letting me post this up for us.
Adam
cochese51105@gmail.com
__________________
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
See you guys in the morning
__________________
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph


