GM Tech - Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn Tech Technical Discussion for General Motors Products both past and present

what are some good but cheap ls1 upgrades

Thread Tools
 
Old Jul 3, 2008 | 10:40 AM
  #1 (permalink)  
GOLD_98_T/A's Avatar
Thread Starter
it is what it is
 
Joined: Jan 2007
Posts: 257
Likes: 0
Default what are some good but cheap ls1 upgrades

Im getting another engine for my trans am, and besides upgrading the oil pump, and possibly adding headers are there any good mods for the motor that wount kill my wallet with labor.
__________________
1998 Trans AM 5.7 LS1

1995 Chevy Camaro 3.4

1992 Chevy Camaro 5.0
Reply
Old Jul 3, 2008 | 10:42 AM
  #2 (permalink)  
GOLD_98_T/A's Avatar
Thread Starter
it is what it is
 
Joined: Jan 2007
Posts: 257
Likes: 0
Default

btw its a 98 ls1, a/t
__________________
1998 Trans AM 5.7 LS1

1995 Chevy Camaro 3.4

1992 Chevy Camaro 5.0
Reply
Old Jul 3, 2008 | 02:47 PM
  #3 (permalink)  
Jono's Avatar
Registered User
 
Joined: Jun 2008
Posts: 43
Likes: 0
Default

Well, cheapest and fastest upgrades you can do would be NOS and a computer chip or Dyno, best for your money, there are also a few small things like power adders etc... but I dont think you get your moneys worth on small things like that (power enhancement boxes etc...) also mybe chagning out your rear end to a better gear ratio isnt to much if you can find the parts or bigger point injectors would give you alittle nice boost too.

Oh can also your intake system, cold are intake and manifold, shave down the sides for smoother air flow, it can be done by yourself with some cheap house tools and helps with air flow.

Last edited by Jono; Jul 3, 2008 at 02:49 PM.
Reply
Old Jul 4, 2008 | 11:23 AM
  #4 (permalink)  
HybridSS's Avatar
I have fuzzy eyebrows
 
Joined: Oct 2001
Posts: 4,269
Likes: 0
Default

stall converter can drop half a second off your 1/4 mile times. They are about $500-700.

Headers nd exhaust

intake lid

cam and valve springs

Nitrous

dont bother with tuning until after you do headers or cam.
__________________

if it's cheap & reliable, it ain't fast, if it's fast & cheap, it ain't reliable, if it's fast & reliable, it ain't cheap
Reply
Old Jul 4, 2008 | 09:34 PM
  #5 (permalink)  
GOLD_98_T/A's Avatar
Thread Starter
it is what it is
 
Joined: Jan 2007
Posts: 257
Likes: 0
Default

headers is in the lead for mods....i got a flowmaster on it now, with an exhaust cut out, and jus a kn filter. Being my motor is f'd (thanks overpaid gm oil pump designers) i got put another one and would much rather have it modded while its out the car. I was also considering doing headers, intake mani with throttle body, ram air, and a retune. Im not looking for crazy power just enough to be able haul arse when i want to.....and here is the current sad site
__________________
1998 Trans AM 5.7 LS1

1995 Chevy Camaro 3.4

1992 Chevy Camaro 5.0
Reply




All times are GMT -8. The time now is 01:33 AM.