launching on drag radials
burn em up till you choke and pass out. then when you wake up, you should be good to go. I usually burn them pretty good, unless the track is prepped really good, then a few seconds is usually enough. +1 on what Half Fast said
__________________
unless you hook better than half fast....just listen to him
__________________
1999 Pontiac Trans Am
1999 Pontiac Trans Am
Originally Posted by 1Bad00SS
What makes you think you could of keep up with me. Have you ever had that car on a dyno?
Originally Posted by 98SOM_T/A
well I bit the bullet and purchased some sexy brand new drag radials...
Mods are as follows..
!cats
TSP rumbler catback
Whisper lid w/k&n
FRA
TB bypass
!EGR
its a M6 and my tires are 245/50/16 Nitto 555r
Mods are as follows..
!cats
TSP rumbler catback
Whisper lid w/k&n
FRA
TB bypass
!EGR
its a M6 and my tires are 245/50/16 Nitto 555r
I only run about 20 in mine on a regular basis... for street launches the car hooks from where ever I let go of the clutch at, but mine are a little bigger.
__________________
-Vince
-Vince
sometimes the track is prepped so well at bmp, that a burn out is not even needed. I normally just get em hot, just a quick burn out, no need to sit there and waste valuble tire away.
__________________
Originally Posted by 98SOM_T/A
what are your methods of launching with them on the street HAVOC?
1000-1500 rpms less than what you would launch at on a well preped track, i.e. if you launch at 4500 at the track try launching at 3000-3500 on the street.
__________________
got my car running good and I got the drag radials mounted and I must say ... traction is night and day now... I'm happier then a pig in shit.
I can slam my car at 25 now and it will actually stick.. power shift 1st to 2nd and only get a chirp now.. its Phenomenal.
I can slam my car at 25 now and it will actually stick.. power shift 1st to 2nd and only get a chirp now.. its Phenomenal.
__________________
Totalled his shit!@
Totalled his shit!@


