L98 options???
refinish artist
Thread Starter
Join Date: May 2003
Posts: 3,941
Likes: 0
Received 0 Likes
on
0 Posts
Now your talk'n Dwayne,do the Holley system and the Trick-flo heads.You only live once bro.They have a nice ATI procharger or Vortec kit for your car too
Originally Posted by trigger
what about all the stuff I read about the loss of low-end torque?
You are going to lose low-end torque when you go to anything beside that stock intake....that's the only thing it does well. But your car will be faster if you trade in some of that low end torque for some of a high end variety. And your car being faster is really the goal here I assume, not just numbers.
another option
__________________
Dwayne Anderson
Dwayne Anderson
this intake
http://store.summitracing.com/defaul...=egnsearch.asp
52 or 58 mm. doesn't really matter.
best heads you can, like afr's 210 and give them to brandon to touch up. along with the biggest cam tpis sells and a 4.10s to match.
jermey can burn a chip to make almost any tpi combo run nicely.
add a small 175 shot and have fun.
dont waste your time converting a stock lt1
http://store.summitracing.com/defaul...=egnsearch.asp
52 or 58 mm. doesn't really matter.
best heads you can, like afr's 210 and give them to brandon to touch up. along with the biggest cam tpis sells and a 4.10s to match.
jermey can burn a chip to make almost any tpi combo run nicely.
add a small 175 shot and have fun.
dont waste your time converting a stock lt1
__________________
Last edited by ???; 05-02-2005 at 02:10 PM.
everyone I've talked to said stay away from the Holley Stealth Ram (HSR). They said it's an old ram jet converted for fuel injection and has poor flow. Air gets trapped in the ass end if the intake and causes turbulence.
__________________
Dwayne Anderson
Dwayne Anderson
Thread
Thread Starter
Forum
Replies
Last Post