LT4BIRD Pics Inside
Underdog
Joined: Nov 2002
Posts: 906
Likes: 0
sounds like excuses are being made in the LT4 camp already. who cares what GTP's 396 made on a dyno? if you can make 500 rwhp n/a out of an LTx based motor you are pretty hardcore.
__________________
1999 Pontiac Trans Am
1999 Pontiac Trans Am
Originally Posted by 1Bad00SS
What makes you think you could of keep up with me. Have you ever had that car on a dyno?
Camera Car!
Joined: Dec 2002
Posts: 953
Likes: 0
Originally posted by LT4BIRD
You know that GTPs LT 396 made 630RWHP N/A?
I guess you are the one that needs catching :bbb:
Its all good. If I lose then there will be many more to choose from. Not to menchon I built my own motor, you did not.
How much do you have in the vett? Oh thats right, three times my ride.
Does that mean you will be three times faster?
Better jet that baby shot
You know that GTPs LT 396 made 630RWHP N/A?
I guess you are the one that needs catching :bbb:
Its all good. If I lose then there will be many more to choose from. Not to menchon I built my own motor, you did not.
How much do you have in the vett? Oh thats right, three times my ride.
Does that mean you will be three times faster?
Better jet that baby shot
__________________
Single Toyota Supra Auto, Twin Turbo C5 FRC, and Chevy Duramax!!
My email:
vince99frc@gmail.com
Single Toyota Supra Auto, Twin Turbo C5 FRC, and Chevy Duramax!!
My email:
vince99frc@gmail.com
After that I think were gonna need a boat!
Thread Starter
Sport bike killa
Joined: Apr 2004
Posts: 63
Likes: 0
Originally posted by DaTruth
Now it's about how much I have spent on my car? You never cease to amaze me. I am no mechanic and I have never claimed to be one. Maybe if you stop building your own motors you would be cruising around longer. I guess home builders can say I built my own house and you did not.. Doh! Machinist can say I built my own rod and you did not. Doh! I tell you what. I am going to start pulling on my nuts real hard now so they can hang. That will make it easier for you to swing from them when I wax that ass..
Now it's about how much I have spent on my car? You never cease to amaze me. I am no mechanic and I have never claimed to be one. Maybe if you stop building your own motors you would be cruising around longer. I guess home builders can say I built my own house and you did not.. Doh! Machinist can say I built my own rod and you did not. Doh! I tell you what. I am going to start pulling on my nuts real hard now so they can hang. That will make it easier for you to swing from them when I wax that ass..
All this talk about swinging nuts wont help you when I spray the shit out of the unstopable never wants to go down camara car.
Maby you want revenge for the smack downs I would inflict on a regular basis?
Hold it together big guy.
__________________
Formula M6
Formula M6
Thread Starter
Sport bike killa
Joined: Apr 2004
Posts: 63
Likes: 0
Originally posted by Jakethesnake
all BS aside
what fuel pump is that? a1000 or eliminator?
all BS aside
what fuel pump is that? a1000 or eliminator?
Its the A1000 pump. -10 to the regulator. -8 return.
I exceded the 255 in tank when I started spraying more.
__________________
Formula M6
Formula M6
Bombs over Baghdad...
Joined: Sep 2003
Posts: 1,297
Likes: 0
Originally posted by LT4BIRD
Its the A1000 pump. -10 to the regulator. -8 return.
I exceded the 255 in tank when I started spraying more.
Its the A1000 pump. -10 to the regulator. -8 return.
I exceded the 255 in tank when I started spraying more.
__________________
Proud OIF/OEF Veteran and still serving
Proud OIF/OEF Veteran and still serving
Thread Starter
Sport bike killa
Joined: Apr 2004
Posts: 63
Likes: 0
Originally posted by Jakethesnake
I just got the eliminator, the A1000 was not enough, do you use the Aeromotive voltage controller as well?
I just got the eliminator, the A1000 was not enough, do you use the Aeromotive voltage controller as well?
The 1000 supports up to 1100 hp.n/a and 800 under boost
I ran this set up for a few years and never went lean at 600rwhp and 700rwtq. But I dont have a blower and my fuel pressure is never over fiftylbs.
No volt controller for me. Just a heavy gage wire and relay.
I guess for high fuel pressure settings a large blower set up will need more.
Is the eliminator loud? Do you have a check valve to hold pressure to the fuel rail?
http://www.thunderracing.com/catalog...d=427&pcid=165
__________________
Formula M6
Formula M6
Last edited by LT4BIRD; Jan 21, 2005 at 06:16 PM.
can survive...
Joined: Jun 2000
Posts: 5,694
Likes: 0
Originally posted by DaTruth
Now it's about how much I have spent on my car? You never cease to amaze me. I am no mechanic and I have never claimed to be one. Maybe if you stop building your own motors you would be cruising around longer. I guess home builders can say I built my own house and you did not.. Doh! Machinist can say I built my own rod and you did not. Doh! I tell you what. I am going to start pulling on my nuts real hard now so they can hang. That will make it easier for you to swing from them when I wax that ass..
Now it's about how much I have spent on my car? You never cease to amaze me. I am no mechanic and I have never claimed to be one. Maybe if you stop building your own motors you would be cruising around longer. I guess home builders can say I built my own house and you did not.. Doh! Machinist can say I built my own rod and you did not. Doh! I tell you what. I am going to start pulling on my nuts real hard now so they can hang. That will make it easier for you to swing from them when I wax that ass..
Underdog
Joined: Nov 2002
Posts: 906
Likes: 0
jake you dont need more than a A1000
you are dreamin son.
you are dreamin son.
__________________
1999 Pontiac Trans Am
1999 Pontiac Trans Am
Originally Posted by 1Bad00SS
What makes you think you could of keep up with me. Have you ever had that car on a dyno?
