Polished alluminum.
just sand it with medium grain.. then go finer and finer untill you get to wetsand paper fine.. after that you use a cloth wheel on a drill with special aluminum polishing compund.. its cake.. AND it will look like a mirror! but upkeep is a bitch. youd be better off just going black and maing it look factory.. but thats just me...
__________________
RIP Tim. i miss you, buddy
RIP Tim. i miss you, buddy
Uh dont use chrome spraypaint and if you do make sure you get a good brand. Me and my friend spray painted some piping on his car chrome and after 2-3 hours that shit still wasnt dry. It eventually all came of. What a piece of shit. Just a little FYI.
__________________
"The kingdom of heaven lies within the mind, heart and soul, of all men. To realize it we need only to overcome our own selfishness."
Shinmantis:Muuuuuggggeeeeennnn!
JohnWhizz1800:BBBOOOOOOOSSSSSSTTTT! F Mugen
John Whizz1800:Mugen =136 ft lbs
AIM: Shinmantis
"The kingdom of heaven lies within the mind, heart and soul, of all men. To realize it we need only to overcome our own selfishness."
Shinmantis:Muuuuuggggeeeeennnn!
JohnWhizz1800:BBBOOOOOOOSSSSSSTTTT! F Mugen
John Whizz1800:Mugen =136 ft lbs
AIM: Shinmantis
Originally posted by "Someone"
Originally posted by Mr Self Destruct
Do what Taylor said and try Wenol. That shit is the BOMB
Originally posted by Mr Self Destruct
Do what Taylor said and try Wenol. That shit is the BOMB
__________________
Shawn
Shawn
Heres a link with a good overview on polishing aluminum...
http://www.rx7turboturbo.com/robrobinette/polish.htm
Theres extra stuff in there that im sure you dont need but it will give you a good idea on the process.
Dan
http://www.rx7turboturbo.com/robrobinette/polish.htm
Theres extra stuff in there that im sure you dont need but it will give you a good idea on the process.
Dan
__________________
AIM: xdanielson2881x
98 GTP
87 "LeMonster!" aka "Lemon Drop"
AIM: xdanielson2881x
98 GTP
87 "LeMonster!" aka "Lemon Drop"
You can have it powdercoated for about 40-80 bucks and thermal coated for under 100. I would thermal coat it inside and out and then take some Wenol and polish the outside and never have to worry about it tarnishing like polished aluminum is prone to doing. It would be worth it in the long run especially for heat deflection and looks.