best way to clean a bare block
best way to clean a bare block
like the title says..have a b18a bare block and its filthy..
what should I use and how should I go about using it?
what should I use and how should I go about using it?
__________________
Totalled his shit!@
Totalled his shit!@
93 octane works too. might have to soak it in it but it works like a charm. ive done it many a time.
__________________
RIP Kevin "Slo_Si" You'll be missed by everyone who knew you my nigga.... I'll see you soon man...
RIP Kevin "Slo_Si" You'll be missed by everyone who knew you my nigga.... I'll see you soon man...
*misread the block you want cleaned up
Hot tank is a no due to it being aluminum
The machine shop can do something called a jet wash
Hot tank is a no due to it being aluminum
The machine shop can do something called a jet wash
__________________
by http://www.flickr.com/people/8341770@N07/, on Flickr
if you can only race me in a straight line then whats the point ...91 SMF SCCA
TR "Old Skool EF" Member #017 chi town brat TR "eg6" crew #6
I see people out there spending money on the car to improve it … If you spend half that effort just working on your driving skills, making you and the car work together as a team, then you’ll go faster – period. To make the car go a second faster on the track takes a lot more energy and money than making yourself drive it one second faster.
– the late Tom Thrash SCCA Solo E Production
Last edited by chi town brat; 05-10-2007 at 07:19 PM.
cleaning the top of some b16 pistons... should I do the same? they have like black build up on top..not much but can I do that with the pistons too?
__________________
Totalled his shit!@
Totalled his shit!@
Drop it in a vat of ATF. That or hot tank it
__________________
ASE: Brakes
Yea..that very well could have been the most retarded idea I've ever heard, but .. do it anyway. -TheShow50h
ASE: Brakes
Yea..that very well could have been the most retarded idea I've ever heard, but .. do it anyway. -TheShow50h
Wear gloves, face mask, PROTECT YOURSELF from the
water/cleaner mix. Don't get the mix on you!
Remove all aluminum, copper,....anything thats not steel/cast iron
from the block. Remove any plugs and fittings. Attach a balanced chain to lower, and get the block out with, later on......so you don't get wet, and don't get anything on you, and don't knock over the drum.
Cover the block with water in a good metal drum,
carefully dump in caustic soda, or lye or maybe drano,
but not all three, heat the water until boiling, if needed.
Heating will take a while with so much to heat. Open fire works
pretty good, with the barrel up off the ground with concrete blocks
at sides/edges of barrel.
Filling the barrel with boiling water from the tap will speed the heating,
but fill barrel BEFORE dumping in the chemicals.
Wear gloves, face mask, PROTECT YOURSELF from the
water/cleaner mix. Don't get the mix on you!
Hoist the block out with the chain when sufficiently boiled.-Bob
water/cleaner mix. Don't get the mix on you!
Remove all aluminum, copper,....anything thats not steel/cast iron
from the block. Remove any plugs and fittings. Attach a balanced chain to lower, and get the block out with, later on......so you don't get wet, and don't get anything on you, and don't knock over the drum.
Cover the block with water in a good metal drum,
carefully dump in caustic soda, or lye or maybe drano,
but not all three, heat the water until boiling, if needed.
Heating will take a while with so much to heat. Open fire works
pretty good, with the barrel up off the ground with concrete blocks
at sides/edges of barrel.
Filling the barrel with boiling water from the tap will speed the heating,
but fill barrel BEFORE dumping in the chemicals.
Wear gloves, face mask, PROTECT YOURSELF from the
water/cleaner mix. Don't get the mix on you!
Hoist the block out with the chain when sufficiently boiled.-Bob
__________________
Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html
Keystone Facebook ...click: "Keystone Motor Car Club"
Port Richey Rod Run at Coast Buick GMC Coming May 25 2024
https://carstoshow.com/registerevent.aspx?eventid=99114
50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...-racing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html
Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/
Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html
Keystone Facebook ...click: "Keystone Motor Car Club"
Port Richey Rod Run at Coast Buick GMC Coming May 25 2024
https://carstoshow.com/registerevent.aspx?eventid=99114
50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...-racing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html
Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/
Last edited by senor honda; 05-10-2007 at 06:13 AM.
that would work but b series blocks are aluminum
__________________
RIP Kevin "Slo_Si" You'll be missed by everyone who knew you my nigga.... I'll see you soon man...
RIP Kevin "Slo_Si" You'll be missed by everyone who knew you my nigga.... I'll see you soon man...