bleed it just like you do brakes. if you have an assistant should take about 5-10 min depending on how much air is in there

 

ok so where is the clutch slave and master cylinder? Its not the sae ones as the brakes im assuming right. im an idiot sorry

 

best advice . your clutch master cylinder is most likely shot , pull the carpet back and notice the oil soaked jute behind it .

* where the rod thats connected to your clutch pedal goes through the firewall. you will have to climb under the dash a lil bit . . oil will be behind hte carpeting below the pushrod. then its the master cylinder . .

i got money on this

 

The clutch master cylinder is on your firewall next to your brake master cylinder. Follow the clutch line to the slave cylinder on your tranny.

 

thanks, i hope its nothing expencive lol

 

check my post for location , and where to look for leaks. its so simple to replace its retarded. just a pita road block when they go bad . mines going bad as i type this actually ..