General Car Chat Talk about cars in general. All makes and models - strictly car discussion.

Air Conditioning question

Thread Tools
 
Old 06-01-2006, 11:05 AM
  #1 (permalink)  
Turn 7 at Sebring
Thread Starter
 
RoadRacer's Avatar
 
Join Date: Dec 2000
Posts: 4,571
Likes: 0
Received 0 Likes on 0 Posts
Default Air Conditioning question

The air in my car isn't cold. When I turn the a/c on the compressor spins 1/4 of a turn then stops, spins 1/4 of a turn then stops and keeps doing that. When I test the system pressure it registers 0, the needle on the gauge does move at all.
When I try and put freon in the system, it won't take it. When I hook-up the a/c refill hose with the engine and a/c on and attempt to fill the system, freon and oil from the refill can spray everywhere when I take the line off.

Could this be a bad expansion valve? Would that cause the compressor to start and stop?
__________________
Patrick -
Old 06-01-2006, 11:25 AM
  #2 (permalink)  
Grandpa
 
Dano Moparo's Avatar
 
Join Date: Mar 2005
Posts: 1,868
Likes: 0
Received 0 Likes on 0 Posts
Default

I'd check your gauges. Maybe a stuck shrader valve? Bad press switch?

Try depressing the shrader valve with a small screwdriver and see if anything shoots out.
Old 06-01-2006, 11:35 AM
  #3 (permalink)  
Turn 7 at Sebring
Thread Starter
 
RoadRacer's Avatar
 
Join Date: Dec 2000
Posts: 4,571
Likes: 0
Received 0 Likes on 0 Posts
Default

I just went and tried that and stuff freon/oil comes out of the high and low valve opening...... it was a white foam, light green oil substance and gas (freon)
__________________
Patrick -
Old 06-01-2006, 11:45 AM
  #4 (permalink)  
Grandpa
 
Dano Moparo's Avatar
 
Join Date: Mar 2005
Posts: 1,868
Likes: 0
Received 0 Likes on 0 Posts
Default

Well you got freon oil and leak checking dye in the system. So it must be something electrical, or the compressor/cluch is locked up.
Old 06-01-2006, 11:50 AM
  #5 (permalink)  
Pastafarian FOR LIFE!!!!!
 
2kSnakeater's Avatar
 
Join Date: Jan 2006
Posts: 3,444
Likes: 0
Received 0 Likes on 0 Posts
Default

did you try hooking the bottle up the the compresor itself? you might have to take the lines off the compresor to do this but It will tell you if the compresor is shot. Also before you take the lines off clamp down the lines on the rubber part real hard so you dont loose the freon and preasure of your sytem. If that doesnt work Jam the bottle of freon into the High Side (red cap) make sure you go it tight and have a friend start the car with the a/c on.
__________________
sig under construction
Old 06-01-2006, 11:55 AM
  #6 (permalink)  
Turn 7 at Sebring
Thread Starter
 
RoadRacer's Avatar
 
Join Date: Dec 2000
Posts: 4,571
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks, I will investigate the other possible issues.
The previous owner installed a new high pressure switch.
__________________
Patrick -
Old 06-01-2006, 12:06 PM
  #7 (permalink)  
Pastafarian FOR LIFE!!!!!
 
2kSnakeater's Avatar
 
Join Date: Jan 2006
Posts: 3,444
Likes: 0
Received 0 Likes on 0 Posts
Default

after your done destroying your A/C with everything I have told you to do, take it to an A/C place. Seriously your compresor is locked up, my wife's celica did the same thing. Dont mess with your A/C, It will only get worse/more expensive if you start taking stuff appart. When your a/c dies plan on spending $500+ to fix it.
__________________
sig under construction
Old 06-01-2006, 12:22 PM
  #8 (permalink)  
Turn 7 at Sebring
Thread Starter
 
RoadRacer's Avatar
 
Join Date: Dec 2000
Posts: 4,571
Likes: 0
Received 0 Likes on 0 Posts
Default

yea I was planning on taking it to get an estimate but wanted some input first.
__________________
Patrick -
Old 06-01-2006, 12:28 PM
  #9 (permalink)  
Pastafarian FOR LIFE!!!!!
 
2kSnakeater's Avatar
 
Join Date: Jan 2006
Posts: 3,444
Likes: 0
Received 0 Likes on 0 Posts
Default

It sucks, Im working on getting a vacuum pump so I can do my own a/c and not get ripped at the auto shop but I havent found an A/C pump for anything less than $1500
__________________
sig under construction
Old 06-01-2006, 12:35 PM
  #10 (permalink)  
Grandpa
 
Dano Moparo's Avatar
 
Join Date: Mar 2005
Posts: 1,868
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 2kSnakeater
It sucks, Im working on getting a vacuum pump so I can do my own a/c and not get ripped at the auto shop but I havent found an A/C pump for anything less than $1500
$1500 is that for a vacuum pump or an a/c recycling machine? Most vac pumps go $200-300.



All times are GMT -8. The time now is 02:46 PM.