a few new pictures of the colt gt...
Thread Starter
All Aboard
Joined: Jan 2002
Posts: 2,061
Likes: 0
a few new pictures of the colt gt...
i was bored and had a few minutes...so i took a few new pictures of my ongoing project.
For those unfamiliar with these cars...Dodge/Mitsubishi produced 1500 of these in 1989 with 1.6L turbo motors. These cars came with 4wheel disc brakes, bigger sway bars, close ratio steering rack and an OEM lip kit.
A 2.0 4g63 bolts right into these and i've gone a few steps further with my car.
Modifications are listed below.
Engine:
4g63 (stock head/bottom end)
Evo3 16g Turbo (exhaust housing is ceramic coated)
2g Exhaust Manifold (ceramic coated)
2g 02 Housing (ceramic coated)
780cc injectors
Extrude Honed Intake Manifold
Evo1 Throttle Body
Evo1 IC
Evo1 IC Piping
2.5 Inch Downpipe
3.0 Inch Exhaust
Transmission:
ACT 2600 Clutch
91 FWD Transmission (Built, Upgraded Synchro's)
Kaaz Differential
Suspension:
Ground Control/Koni (rear)
Ground Control/Kyb (front)
RRE Camber Plates
Evo1 Dual Piston Front Brakes
RRE Stainless Steel Braided Brake Lines
Evo1 Wheels
The car is making around 300whp, 300tq and weighs about 2350lbs. I've taken out the heater core, ac setup and a few other misc items.
Here are a few new pictures...
For those unfamiliar with these cars...Dodge/Mitsubishi produced 1500 of these in 1989 with 1.6L turbo motors. These cars came with 4wheel disc brakes, bigger sway bars, close ratio steering rack and an OEM lip kit.
A 2.0 4g63 bolts right into these and i've gone a few steps further with my car.
Modifications are listed below.
Engine:
4g63 (stock head/bottom end)
Evo3 16g Turbo (exhaust housing is ceramic coated)
2g Exhaust Manifold (ceramic coated)
2g 02 Housing (ceramic coated)
780cc injectors
Extrude Honed Intake Manifold
Evo1 Throttle Body
Evo1 IC
Evo1 IC Piping
2.5 Inch Downpipe
3.0 Inch Exhaust
Transmission:
ACT 2600 Clutch
91 FWD Transmission (Built, Upgraded Synchro's)
Kaaz Differential
Suspension:
Ground Control/Koni (rear)
Ground Control/Kyb (front)
RRE Camber Plates
Evo1 Dual Piston Front Brakes
RRE Stainless Steel Braided Brake Lines
Evo1 Wheels
The car is making around 300whp, 300tq and weighs about 2350lbs. I've taken out the heater core, ac setup and a few other misc items.
Here are a few new pictures...
Spent more money than you
Joined: Oct 2003
Posts: 7,708
Likes: 0
nice 
when can I get a ride?
when can I get a ride?
__________________
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
Racing Integration
LHT Performance
My tuner is named Alpha
Roque Fab = The best Fabricator in the WHOLE WORLD
The best engine in the world is the vagina, it takes any size piston, its self lubricating, starts with 1 finger, and every 4 weeks does its own oil change. It's just a pity the management system is so fucking temperamental.
Eis Aner Oudeis Aner
Joined: Feb 2003
Posts: 4,503
Likes: 0
Looking good man.
I wish Brian would get motivated and get his back togther!
Keep up the excellent work!
I wish Brian would get motivated and get his back togther!
Keep up the excellent work!
