bronzing!!!!!!!!!!!
Thread Starter
BOOST IS BETTER!
Joined: Jan 2004
Posts: 7,935
Likes: 0
bronzing!!!!!!!!!!!
ok....so what is the best way/kind/method/clearcoat all the info on bronzing you can give me...lemme haveit!
*EDIT* POST UP PICS OF BRONZED STOCK WHEELS!
*EDIT* POST UP PICS OF BRONZED STOCK WHEELS!
__________________
Last edited by 94lsTEG; Nov 26, 2004 at 08:40 PM.
You Can't Moderate Me.
Joined: Feb 2004
Posts: 12,541
Likes: 0
<--gave his .02 already 
1-get DuPont "high performance wheel paint" in bronze(they have the clear coat also at walmart)
2-tape off the wheels
apply ONE light coat first,then a thick 2nd coat
3-let sit for about 30 minutes
4-two coats of clear,let sit for one hr
5-put on the car,and be mad JdM StYLiN
1-get DuPont "high performance wheel paint" in bronze(they have the clear coat also at walmart)
2-tape off the wheels
apply ONE light coat first,then a thick 2nd coat
3-let sit for about 30 minutes
4-two coats of clear,let sit for one hr
5-put on the car,and be mad JdM StYLiN
__________________
R.I.P Pablo "Fathead" Garcia & Kevin "Slo_Si" Gonzalez Forever in our hearts.
R.I.P Pablo "Fathead" Garcia & Kevin "Slo_Si" Gonzalez Forever in our hearts.
YOU WONT!
Joined: Nov 2003
Posts: 1,677
Likes: 0
Originally posted by Skittle
<--gave his .02 already
1-get DuPont "high performance wheel paint" in bronze(they have the clear coat also at walmart)
2-tape off the wheels
apply ONE light coat first,then a thick 2nd coat
3-let sit for about 30 minutes
4-two coats of clear,let sit for one hr
5-put on the car,and be mad JdM StYLiN
<--gave his .02 already
1-get DuPont "high performance wheel paint" in bronze(they have the clear coat also at walmart)
2-tape off the wheels
apply ONE light coat first,then a thick 2nd coat
3-let sit for about 30 minutes
4-two coats of clear,let sit for one hr
5-put on the car,and be mad JdM StYLiN
will that make all the jDm GuRlS want me?!
__________________
Let The Good Times Roll
Subie Life!
Let The Good Times Roll
Subie Life!
The little 5.0 that could
Joined: Apr 2003
Posts: 13,275
Likes: 0
Originally posted by Clifford
do you have to sand it before applyin gthe first coat?
do you have to sand it before applyin gthe first coat?
__________________
-Vince
-Vince
weezin the juice
Joined: Mar 2004
Posts: 3,341
Likes: 0
so how about my 1990 240sx wheels hehe, should i sand them? they ahve some minor well "imperfections"...but what grit paper should i use? i sprayed aircraft stripper on them to see what itd do,..not much...
__________________
