General Car Chat Talk about cars in general. All makes and models - strictly car discussion.

Fuel Flush

Thread Tools
 
Old May 11, 2004 | 10:56 PM
  #1 (permalink)  
Santos's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 2,453
Likes: 0
Default Fuel Flush

i have a new fuel pump, fuel filter, injector seals.

i want to get my injectors cleaned...by taking them out and getting tested individually. anyone in tampa can do that?

and whats the best way to clean out a gas tank and fuel lines?


thanks your knowledge is appreciated
__________________
TR "Old Skool" DA member #60

Santos618 - Xbox 360 gamertag
GTA4
Forza 4
Madden 12
open to any good online games, i just suck at shooters lol
Reply
Old May 12, 2004 | 08:01 AM
  #2 (permalink)  
boostdshadow's Avatar
old school
 
Joined: Sep 2003
Posts: 245
Likes: 0
Default

I dont know of any places in Tampa but there is a place in pinellas park that does all of my injector services. It is called park auto service #727-521-2910. Talk to brian, He is an old racer and good with injectors. Tell him mike thomas sent you. As far as the gas tank try a local radiator shop, Most of them clean gas tanks as well as radiators. Hope this helps.
Reply
Old May 12, 2004 | 09:50 AM
  #3 (permalink)  
Santos's Avatar
Thread Starter
Registered User
 
Joined: Jul 2002
Posts: 2,453
Likes: 0
Default

Thats wassup...how about the fuel lines? anyway to clean those out?.
__________________
TR "Old Skool" DA member #60

Santos618 - Xbox 360 gamertag
GTA4
Forza 4
Madden 12
open to any good online games, i just suck at shooters lol
Reply
Old May 12, 2004 | 02:07 PM
  #4 (permalink)  
boostdshadow's Avatar
old school
 
Joined: Sep 2003
Posts: 245
Likes: 0
Default

The only thing that I could come up with is something they sell to clean out trans lines. It comes in a aresol can with a short line on it to connect to trans lines. The line is threaded on the end so you may have to come up with a way to connect to your fuel line but it should work good. You can buy it from bumper to bumper auto parts. It works great, I would use compressed air to blow out the lines after you clean them. Good luck.
Reply
Old May 12, 2004 | 03:03 PM
  #5 (permalink)  
RidingNiceRice's Avatar
BIG HONKIN POS !
 
Joined: May 2004
Posts: 0
Likes: 0
Default

run 108 octane through it, I dont know sorry I even posted
Reply




All times are GMT -8. The time now is 01:36 PM.