RX-8's Are here!!!!
lol......didn't you know that for every "brap" that is 25 gained horsepower? so if you have the "brapbrapbrap" exhaust that's 75 HP by just opening the exhaust!
__________________

"Gripping the wheel his knuckles went white with desire, the wheels of his mustang exploding on the highway like a slug from a .45. True death. 400 horsepower of maximum performance piercing the night, this is Black Sunshine"
"Gripping the wheel his knuckles went white with desire, the wheels of his mustang exploding on the highway like a slug from a .45. True death. 400 horsepower of maximum performance piercing the night, this is Black Sunshine"
Originally posted by Doctor Pressure
whats the sticker price??????
whats the sticker price??????
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Its still the 13b which is a 1.3liter. I'm not sure how the configure 1.3L, but poppasmirf has it closer that I would be able to explain.
Sticker is anywhere from 25,xxx, to 33,xxx. Currently we are asking for roughly a 4k markup. Who knows if that will stick.
goobster... I have to agree with poppasmirf...you need to some research on the rotary engine.
Sticker is anywhere from 25,xxx, to 33,xxx. Currently we are asking for roughly a 4k markup. Who knows if that will stick.
goobster... I have to agree with poppasmirf...you need to some research on the rotary engine.
__________________
Heavy car with a 2.5L
Heavy car with a 2.5L
Originally posted by psifactor
Its still the 13b which is a 1.3liter. I'm not sure how the configure 1.3L, but poppasmirf has it closer that I would be able to explain.
Sticker is anywhere from 25,xxx, to 33,xxx. Currently we are asking for roughly a 4k markup. Who knows if that will stick.
goobster... I have to agree with poppasmirf...you need to some research on the rotary engine.
Its still the 13b which is a 1.3liter. I'm not sure how the configure 1.3L, but poppasmirf has it closer that I would be able to explain.
Sticker is anywhere from 25,xxx, to 33,xxx. Currently we are asking for roughly a 4k markup. Who knows if that will stick.
goobster... I have to agree with poppasmirf...you need to some research on the rotary engine.
Interesting car. Look forward to seeing one on the street. They make pretty good power (250bhp), but very little torque (159lb-ft). Both numbers are at fairly high RPM (8200/5500 respectively). Comes with a 6-speed option, which is a good thing on a motor that has to spin so high to make power. I kind of liked the old RX-7 exhaust note...kinda.
__________________
“You will never do anything in this world without courage. It is the greatest quality of the mind next to honor.” - Aristotle (384 BC-322 BC)
Want to know what the war in Iraq is really costing America? Click here
“You will never do anything in this world without courage. It is the greatest quality of the mind next to honor.” - Aristotle (384 BC-322 BC)
Want to know what the war in Iraq is really costing America? Click here
wait... i thought they were running some new "renesis" motor... something about bigger rotors, lighter construction, different ports? i'd say that's miles away from a 13b...
The renesis rotary engine is still the 1.3L 2 rotor in-line engine that has two sections each containing a rotor. Then there is an eccentric shaft ( like a crankshaft in a piston engine) which sits 180 degrees out of phase putting the power to a flywheel.
The intake and exaust ports are larger than any naturally aspriated rotary engine by 30%. This reduceds intake flow resistance also improving fuel efficency and reducing emissions.
Its the same 13b that they have been making changes to for many years.
This time they are calling it the Renesis which is 30% lighter and 20% smaller than before.
Basically they have made some major inprovements.
-Leaner fuel mixture
-increased combustion efficiency and fuel economy
-reduced emissions
40% less fuel consumption at idle than the rx7
__________________
Heavy car with a 2.5L
Heavy car with a 2.5L
still the slowest car out of all the cars in the 30k range there
evo 8- faster
sti- faster
cobra- faster
now if they make a TT RX8 for production, that bitch will be BAD ASS
evo 8- faster
sti- faster
cobra- faster
now if they make a TT RX8 for production, that bitch will be BAD ASS
__________________
http://www.floridaracing.org

Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org

Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP



