--------------------------------------------------------------------------------

its a 3.0 v6

it was running fine in the morning my g/f went to leave work and it wouldnt start the engine turned over

i ended up changing the cap and roter im not great with naming the parts but i changed the cap part were there's 6 spark plug wires there's one that goes to the ignition (i think thats what its called) that part gets spark ( i know becuase it shocked me and i saw sparks) but where the wires going to the spark plugs they dont get any spark every once in a while it may spark when trying to start the truck but still it turns over


any ideas of what it could be ?

 

Gas in it?

 

yes

 

Did it start after adding more gas?

 

im lost on what to do now ... i changed the cap/ rotor/ distributor/ igniter and checked the module (even put a new one in but took it back ) i put a new wire from the igniter to the cap and still no spark

 

put gas in sunday and tuesday night it didnt work didnt notice any bucking or anything after putting gas

 

I thought you had spark? It shocked your socks off right? Just a thing to check is the fuel cutoff switch. It interrupts the FP in case of vehicle collision. Dont know where on your truck but you can look it up. Just a simple push reset.